Dangerous goods training for air transport is job-specific instruction, followed by a test, for people who prepare, accept, handle or carry dangerous goods by air. Awareness eLearning can carry part of that load, but it cannot replace the approved program, the assessment or the hands-on practice your authority expects.
Search results for this topic mostly sell seats to shippers. Few help the person who builds the course. This guide is for aviation training providers. It covers module structure, assessment, records, the recurrent cycle and a yearly update routine.
This is not legal advice. Rules differ by country, and your approving authority decides what counts. We checked each rule below against primary sources in October 2026.
Key takeaways
- Build one shared awareness core, then separate paths by job function, because awareness alone does not make a learner competent for a role.
- Air training repeats within 24 months under the ICAO Technical Instructions, as quoted by the UK and Irish authorities. US domestic rules say three years. Track the shorter cycle.
- Whether a course can run online, and how its exam is supervised, depends on your authority. Ask before you build.
- Review the course every year, because IATA publishes a new Dangerous Goods Regulations edition annually.
What is dangerous goods training, and who has to take it?
Dangerous goods training is instruction that matches each person’s duties in the air transport chain, followed by a test. The Irish Aviation Authority says programs must exist for shippers, operators, ground handlers, freight forwarders, passenger-processing and screening agencies, and postal staff who handle dangerous goods mail.
The UK Civil Aviation Authority’s CAP 483, Training in the Safe Transport of Dangerous Goods by Air (fifth edition, November 2025) names three components. They are general awareness or familiarization, function-specific and safety training. It adds that employers must ensure personnel are competent for every function they perform.
The US adds a fourth component. Under 49 CFR 172.704, as published by Cornell’s Legal Information Institute, each hazmat employee gets general awareness, function-specific, safety and security awareness training.
Who approves dangerous goods training, and where does eLearning fit?
A State authority approves dangerous goods training programs for operators. Course builders, authoring tools and learning platforms do not hold that approval. CAP 483 says the Technical Instructions require the CAA to approve training programs for UK operators. The Irish Aviation Authority says operator programs go to it for review and approval.
Approval rules are not the same everywhere. The FAA’s shipper training page says the agency does not review, approve or endorse specific training providers. Each employer must make sure its people are adequately trained. In the UK, CAP 483 paragraph 2.6 says training providers seeking to teach through online or distance learning methods must obtain an approval from the CAA.
That approval looks at delivery, not only content. The UK application asks how student interaction, exam invigilation, identity checks and participation tracking will work. Plan those features before you storyboard.
For the broader aviation picture, see what aviation regulators accept for eLearning. Our post on moving food safety courses online without losing approval shows the same logic in another field.
How should a dangerous goods training course be structured?
A dangerous goods training course should be built from the components the rules name: general awareness, function-specific training, safety training and, in the US, security awareness. Build one shared awareness core, then branch by job function. A short awareness course does not make anyone competent for a specific role.
The blueprint below maps each component to what eLearning can reasonably carry. The right-hand column is our design judgment, not a regulatory ruling.
| Component | What the source says | eLearning fit (our judgment) |
|---|---|---|
| General awareness or familiarization | Required by 49 CFR 172.704(a)(1) and CAP 483 paragraph 1.5 | Strong fit: a shared module with label and marking drills |
| Function-specific | Tied to each job. IATA maps its courses to function numbers in its Dangerous Goods Training Guidance | Role paths with checklist practice. IATA lists its recurrent preparing-consignments course as classroom only |
| Safety | CAP 483 paragraph 1.7: recognize hazards, handle safely, apply emergency procedures | Strong fit: short scenarios on what to do when something looks wrong |
| Security awareness (US) | 49 CFR 172.704(a)(4): new employees within 90 days of employment | Strong fit: one module with a knowledge check |
| In-depth security (US, where a security plan applies) | 49 CFR 172.704(a)(5): company security objectives and procedures | Company-specific content, written with your client |
IATA’s dangerous goods page says training has moved to competency-based training and assessment (CBTA), “as agreed by ICAO.” It also says the former Appendix H of its Dangerous Goods Regulations is now a stand-alone Dangerous Goods Training Guidance (Edition 1), a resource for building training under CBTA. Write each objective as an observable task, such as “decide whether a package can be accepted using the current acceptance checklist,” then write the test question from it.
Pro tip: Tag Every Screen To A Rule. In the storyboard, give each screen a hidden source tag: the regulation, paragraph and edition it relies on. When a new edition arrives, you can list every affected screen in minutes.
What must be assessed and recorded in dangerous goods training?
Dangerous goods training must end with an assessment, and the employer must keep a record of it. The Irish Aviation Authority says a test to confirm understanding must follow the training. CAP 483 paragraph 5.8 says all students in initial or recurrent refresher training “must sit an assessment of competency.”
The Irish Aviation Authority lists what a record must hold. Build your LMS reports to produce each item:
- The individual’s name.
- The month of the most recent training completion.
- The training materials used, or a copy or reference to them.
- The training provider’s name, address and approval reference.
- Evidence of a satisfactory test result.
Retention differs. CAP 483 says employers must keep training and assessment records for a minimum of 36 months. Under 49 CFR 172.704(d), the US record covers the preceding three years. It stays on file while the employee works in a hazmat role and for 90 days afterward.
Exam supervision is where sources differ. CAP 483 paragraph 5.9 says exams need to be invigilated, and paragraph 4.3 says that includes at least one CAA-approved instructor. IATA’s passenger handling e-learning course uses an “unsupervised online exam” of 30 multiple-choice questions with an 80% pass mark. They answer to different rules, so design the exam for the authority that approves your client.
How often does dangerous goods training have to be repeated?
Dangerous goods training for air transport must be repeated within 24 months of the previous training under the ICAO Technical Instructions. The Irish Aviation Authority quotes that rule directly. The US domestic rule in 49 CFR 172.704(c) is at least once every three years, so air providers should set the clock at 24 months.
The Irish Aviation Authority’s wording is: “Recurrent training shall take place within 24 months of previous training to ensure knowledge is current.” CAP 483 paragraph 1.8 repeats the rule. It adds that finishing in the last three months of the window carries the new validity from the completion month. Confirm that detail with your authority.
The FAA’s page lists both numbers: three years for domestic air and two years under the ICAO Technical Instructions. In a 2010 interpretation letter, PHMSA said two-year ICAO training that also covers the 172.704(a) components meets the US rule. Check whether your client falls under US rules, ICAO rules or both.
Some training falls outside the cycle. Under 49 CFR 172.704(c), new or reassigned employees may work under supervision, but training must be completed within 90 days. CAP 483 paragraph 1.6 says staff moved to a new function must be assessed. Build “new starter” and “job change” rules into your LMS.
How do you update dangerous goods training every year?
Dangerous goods training should be reviewed every year because IATA publishes a new Dangerous Goods Regulations edition annually, while the ICAO Technical Instructions are biennial. CAP 483 paragraph 5.6 says recurrent training must cover changes affecting students’ responsibilities since their last training, so a yearly review is how you keep that promise.
As of October 2026, IATA’s 67th edition took effect on 1 January 2026, and IATA’s dangerous goods page lists 68th edition changes effective 1 January 2027. CAP 483 paragraph 2.9 lets UK training organizations use the previous year’s IATA manual in the intervening year, so confirm which edition your authority expects.
Use the triggers below to decide when to open the course.
| Trigger | Example | Your action |
|---|---|---|
| New IATA edition | Each 1 January (67th in 2026, 68th listed for 2027) | Compare IATA’s significant-changes summary with your screen tags |
| Mid-year addendum | IATA’s page mentions an ICAO addendum on power banks dated 27 March 2026 | Patch the affected screens and republish |
| Biennial Technical Instructions | CAP 483 paragraph 2.9 notes they are biennial | Review every module and ask whether your program needs resubmitting |
| Authority guidance | CAP 483 fifth edition, November 2025 | Recheck online delivery and exam rules |
| Company change | New procedure or new job function | Assign targeted training |
Then run the same cycle each time:
- Collect the change summary for the new edition or addendum.
- Search your screen tags and list the affected screens.
- Rewrite only those screens and get SME sign-off.
- Refresh the question bank. CAP 483 says training providers should produce new exam papers annually.
- Ask your authority whether the change needs resubmission.
- Publish a new course version and archive the old one.
- Store the version in each learner record, then assign recurrent training to anyone due.
Our posts on course version control when regulations change and aviation course version control cover the mechanics.
Pro tip: Keep Volatile Content In Swappable Screens. Put limits, tables and form examples on a few screens or a linked job aid, and keep theory and scenarios elsewhere. The yearly update then touches a handful of screens.
How do you track dangerous goods training expiry dates?
Dangerous goods training expiry tracking means recording each learner’s completion month, course version and next due date, then alerting before the 24-month window closes. A spreadsheet can work for a small team. Larger teams usually need a training management system.
SimpliTrain is made by the same company as SimpliAuthor, which publishes this blog. SimpliTrain’s aviation training management page lists dangerous goods training among the recurrent training it tracks and says automated alerts fire 90, 60 and 30 days before expiry. We did not test those features for this post. No software holds regulatory approval on its own, because your authority approves your program and how you deliver it.
What should you do next?
Start with one function path for dangerous goods training, such as passenger handling or cargo acceptance, and write its objectives as observable tasks. Take the exam rules from the authority that approves that client, not from a vendor’s course page.
Then ask that authority two questions: can the theory part run online, and how must the exam be supervised? Tag every screen to a rule and edition, and add the next IATA edition date to your production calendar.
If you want to see how tracked recurrent training could work for your team, you can request a SimpliTrain demo.
Frequently asked questions
Who needs dangerous goods training for air transport?
Anyone whose job touches dangerous goods in the air chain needs training matched to that job. The Irish Aviation Authority names shippers, operators, ground handlers, freight forwarders, passenger-processing and screening agencies, and postal staff who handle dangerous goods mail. Your authority decides which roles in your organization count.
How often is dangerous goods training required?
Air training must be repeated within 24 months of the previous training, according to the Irish Aviation Authority and the UK CAA. The FAA says US domestic air training is required at least every three years under 49 CFR 172.704. Employees also need training within 90 days of starting or changing function.
Can dangerous goods training be done online?
It depends on your authority. The UK CAA says training providers must obtain approval to teach through online or distance learning, and it asks for invigilated exams and identity checks. IATA lists e-learning courses for several roles. Ask your authority before you build, and do not assume one country’s answer applies elsewhere.
How long is a dangerous goods training certificate valid?
IATA’s course pages for passenger handling e-learning and for preparing consignments both state the award is valid for 24 months. Other authorities and employers set their own rules, and the clock may run from the completion month. Record the date and the course version for every learner.
What does CBTA mean in dangerous goods training?
CBTA stands for competency-based training and assessment. IATA says dangerous goods training has moved to CBTA “as agreed by ICAO.” In practice, each objective describes a job task, and the assessment checks that task. IATA publishes stand-alone Dangerous Goods Training Guidance (Edition 1) to help build such training.
What records must be kept for dangerous goods training?
The Irish Aviation Authority lists the person’s name, the month of latest completion, the training materials, the provider’s details and approval reference, and evidence of a satisfactory test. CAP 483 sets a minimum 36-month retention. 49 CFR 172.704(d) requires US records covering the preceding three years.



