A facilitator guide is the document a trainer uses to deliver an instructor-led session: the objectives, timed agenda, talking points, activity instructions and notes that make the session repeatable. To digitize a facilitator guide, you do not convert one file into another. You split it by job, because each part now serves a different audience.
The same is true of the printed participant workbook. Some pages become eLearning, some a fillable form, some a run sheet for a live virtual session, and a few are better left on paper.
This post gives you a conversion map and a checklist, so the session keeps what made it work. The map is our own framework, built from the published sources linked below. We did not test it against a specific LMS or authoring tool, so check each step against your platform.
Key takeaways
- A facilitator guide splits three ways: explanations become eLearning, delivery cues become a run sheet, and writing tasks move to the workbook.
- SCORM can record completion, scores and resume state, not long written answers. xAPI can record more, but only if your LMS or a Learning Record Store supports it.
- Signed practicals, observed skills checklists and point-of-use job aids often work better on paper.
What is a facilitator guide, and how does it differ from a participant workbook?
A facilitator guide is the trainer’s playbook for an instructor-led session, covering objectives, timing, talking points, activities and notes. A participant workbook is the learner’s companion, with space for notes, exercises and reference material. The guide tells the trainer what to do. The workbook gives participants somewhere to do their own thinking.
Terms vary by team. Roompact’s blog argues that “facilitation guide” and “lesson plan” are two terms for the same thing. Pick one name and use it everywhere.
Workbooks are often mistaken for printed slides. The National Highway Institute’s LearnersFirst guidance on workbook elements says a workbook should hold much more than copies of the slides. It should work as an interactive tool in the room and as a job aid back at work.
What is inside a facilitator guide?
A facilitator guide typically contains an overview, learning objectives, a materials checklist, a preparation checklist, room setup, a timed agenda, general facilitation guidance and a post-session checklist. SessionLab’s guide to facilitator guides lists nine such components, and each one lands somewhere different when you digitize.
For conversion, seven parts matter most:
- Timed agenda: when each block starts and how long it runs.
- Scripts and talking points: what the trainer says.
- Activities: setup, instructions and debrief.
- Handouts and slides: what the trainer hands out or shows.
- Assessments: quizzes, practical tests and sign-offs.
- Trainer notes: warnings, likely questions and the “why.”
- Participant exercises: the workbook pages the guide cites.
SessionLab also advises explaining the “why” behind each activity and reserving verbatim scripting for compliance-sensitive wording. Both habits carry into digital delivery.
Which parts of a facilitator guide become eLearning, a workbook or a run sheet?
Each part of a facilitator guide goes where its audience and timing demand. Explanations a learner can absorb alone become eLearning. Writing tasks become a digital workbook or form. Live delivery cues become a run sheet. Hands-on or signed items often stay on paper. The table below maps eight components.
| Component | Becomes eLearning | Becomes a digital workbook or form | Becomes an LMS or vILT run sheet | Keeps a paper version |
|---|---|---|---|---|
| Timing and agenda | Module order, if parts go self-paced | Usually none | Minute-by-minute run sheet, re-timed for screens | A backup copy of the run sheet |
| Scripts and talking points | Explanations a learner can take in alone | Usually none | Prompts, questions and verbatim compliance lines | Usually none |
| Group activities | Only solo-friendly ones, such as scenarios | Prep or reflection that feeds the activity | Setup, breakout instructions and debrief questions | Physical simulations and equipment tasks |
| Handouts and reference | Short read-first explainers | A fillable form if the learner completes it | A link or file in the session room | Point-of-use job aids |
| Slides | Rebuilt as screens, not pasted in | Usually none | Rebuilt with less text per slide | Usually none |
| Assessments | Auto-scored knowledge checks | Self-checks and reflection prompts | Polls and quick checks during the session | Signed practicals and observed skills checklists |
| Trainer notes | Rarely, only helpful “why” content | Usually none | Cue notes beside each block, with producer tasks | A prep sheet for rehearsal |
| Participant exercises | Practice that scores automatically | Notes, planning and commitment pages | A task link released at the right minute | Large-format or on-site work |
A component often lands in two columns. A lecture is the common case: the explanation becomes eLearning or pre-work eLearning modules, while the trainer’s discussion prompt stays in the run sheet. Blended learning design shows how to make that call activity by activity, and ILT to eLearning conversion covers rebuilding the self-paced parts.
How do you digitize the facilitator guide itself?
Digitizing a facilitator guide means turning the Word or PDF document into a run sheet: a timed, scannable sequence of cues that a facilitator and a producer can follow live on screen. Keep the “why,” the timing and the prompts. Cut what a trainer reads once during preparation.
Follow these steps in order:
- Separate preparation from delivery. Move the materials list and setup notes into a one-time prep checklist. The National Highway Institute’s web-conference training facilitator checklist spreads this work over weeks, from a dry run four weeks out to clearing polls the day before.
- Re-time every block for the platform. Polls, breakout moves and screen shares all take clock time. Our ILT to vILT course redesign post covers session length and producers.
- Cut scripts to prompts. Keep verbatim lines only where the wording is mandated.
- Add platform cues beside each block. Name the poll, the breakout room and the file to share. A 2025 virtual run-of-show example hosted on the National Association of County and City Health Officials (NACCHO) site adds a column for chat instructions beside the facilitator notes.
- Assign the host or producer. The NHI checklist describes a host who helps clear polls and filter chat questions, so the facilitator can keep teaching.
Pro tip: Rehearse With Someone Who Did Not Write It. A guide’s author fills gaps from memory without noticing. A colleague running it cold will stall where a new trainer would, and those stalls are your edit list.
How do you digitize a participant workbook?
Digitizing a participant workbook starts with sorting its pages into three types: note-taking pages, exercise pages and reference pages. Notes and exercises become fillable fields or eLearning interactions. Reference pages become job aids or linked files. The right format depends on whether you need the answers back.
Compare the four common formats before you commit:
| Format | Works well for | Limits |
|---|---|---|
| Fillable PDF | Notes and plans the learner keeps | Graduate School USA’s comment-enabled PDF guides need the free Acrobat Reader for fillable features. The trainer sees nothing unless the learner returns the file. |
| Form or interaction inside the course | Exercises you want scored or recorded | What gets stored depends on your LMS and authoring tool (see the next section). |
| Standalone digital workbook tool | Rich workbooks with a copy per learner | Vendor-specific. Ask what is stored, who can read it and how it exports. We tested none. |
| Printed workbook | On-site, hands-on or low-connectivity sessions | No tracking, and every update means a reprint. |
A one-page checklist used at the workstation is a job aid, and job aids vs eLearning explains when a job aid beats a course.
What can you track in a digital participant workbook, and what can’t you?
A digital participant workbook can usually track whether a learner opened, completed or submitted a page, and sometimes a score. It cannot prove learning from a free-text answer, and the standards limit what a course can store. SCORM suits completion and resume state. xAPI can record richer activity if your LMS or a Learning Record Store supports it.
Articulate’s support documentation gives the suspend data limit, the space a course uses to remember where the learner stopped, as 4,096 characters in SCORM 1.2, 4,000 in SCORM 2004 2nd Edition and 64,000 in 3rd and 4th Editions (as of October 2026). Depending on how your authoring tool stores typed answers, long reflections may not fit. Test before promising a manager a record of what learners wrote.
xAPI works differently. According to the xAPI overview, it collects data about experiences “online and offline,” and the xAPI specification describes each record as a statement with an actor, a verb and an object, stored in a Learning Record Store.
Whatever the standard, a digital workbook tracks activity, not learning:
- Trackable: page opened, page completed, answer submitted, auto-scored item correct.
- Not trackable: answer quality, on-the-job use, or anything done on paper or in the room.
Pro tip: Track the Submission, Route the Answer. Record in the LMS that a learner submitted a commitment plan, and send the text itself to the trainer or manager by email or a shared form. You get a completion record without depending on how much text your standard can store.
What should stay on paper?
Paper stays the better choice for signed practical assessments, observed skills checklists, point-of-use job aids and hands-on activities where a screen gets in the way. A printed page needs no login or connection and can sit next to the equipment. Digitize these only when you need the record.
If a client or regulator requires a signed record, confirm which format they accept before digitizing the sign-off. We did not research any specific rule. A middle path is to sign on paper, then enter the result into the LMS.
What is the checklist for digitizing a facilitator guide and workbook?
This checklist covers ten checks to run before a digitized facilitator guide and participant workbook go live: inventory the components, give each a destination, rebuild for the platform, decide what to track and rehearse. Work through the ten checks in order, and treat any unchecked item as a risk.
- List every component of the guide and workbook, with page counts.
- Assign each component one destination from the map: eLearning, workbook, run sheet or paper.
- Move explanations into eLearning or pre-work, then delete them from the guide so content lives in one place.
- Rebuild the agenda as a run sheet with platform-specific timings.
- Cut scripts to prompts and keep verbatim lines only where wording is mandated.
- Name the host or producer task beside each block.
- Sort workbook pages into notes, exercises and reference, then choose a format for each.
- Decide what you must track, and confirm your LMS stores it before you build.
- Keep one master source for guide, workbook and eLearning, and fold feedback into it. SessionLab recommends single-source version control for guides.
- Run a dry run with someone who did not write it, then collect trainer feedback after the first live session.
What should you do next?
The next step is to pick one instructor-led course, run its facilitator guide and participant workbook through the map and checklist, and pilot the result with one cohort. Start small, because the first conversion shows which parts were doing hidden work.
If you run a training company and want scheduling, instructor management, virtual classrooms and attendance tracking together, the SimpliTrain page for training companies lists those modules (as of October 2026). SimpliTrain is made by the same company that publishes this site, so weigh that recommendation accordingly. The map and checklist above work with any LMS.
Frequently asked questions
What is a facilitator guide?
A facilitator guide is a structured document a trainer uses to deliver an instructor-led session. It usually holds the objectives, a timed agenda, talking points, activity instructions and notes. Its purpose is consistent delivery, so different trainers can run the same session.
What is the difference between a facilitator guide and a participant workbook?
A facilitator guide is written for the trainer and covers what to say, when and why. A participant workbook is written for the learner and holds note space, exercises and reference pages. The guide drives delivery. The workbook captures the learner’s thinking and often doubles as a job aid.
Is a facilitator guide the same as a lesson plan?
Often yes. Roompact argues that “facilitation guide” and “lesson plan” are two terms for the same detailed document. Teams choose by culture, since “lesson plan” sounds classroom-based and “facilitation guide” sounds more collaborative. Pick one term and use it consistently.
Can you turn a facilitator guide into an eLearning course?
Only in part. Explanations a learner can absorb alone can become eLearning, but timing, discussion prompts and trainer notes serve live delivery and belong in a run sheet. Converting the whole guide into a course usually loses the interaction that made the session work.
Should a digital facilitator guide be scripted word for word?
Usually not. SessionLab recommends a middle path for enterprises, with verbatim language reserved for compliance-sensitive content. Short prompts, key questions and the reason behind each activity keep trainers natural on camera. Mark any fixed lines clearly so trainers know which ones to read exactly.
Can you track a digital participant workbook in an LMS?
Partly. Most LMS platforms can record that a learner completed a workbook module, and sometimes a score. Storing long written answers depends on the standard and your tools, since SCORM suspend data is limited. Check how your LMS handles responses before promising a record of what learners wrote.



