Illustrated cover reading "Human Factors Training for Maintenance Staff" on a mint green background with a scale pattern

Human Factors Training for Maintenance Staff: How to Build It as eLearning

Table of Contents

Share:
Easily share intel
Summarise this page with your favorite AI assistant

Human factors training for maintenance staff teaches technicians, inspectors and supervisors how human performance limits, such as fatigue, rushed handovers and unclear communication, lead to maintenance errors, and which habits catch those errors before an aircraft returns to service. eLearning can deliver the knowledge part well. It cannot replace a conversation about your own hangar floor.

This guide is for training providers, maintenance organizations, repair stations and maintenance schools that build or buy this course. It covers what regulators say, a module blueprint, a scenario template and record keeping. We are a content authoring vendor, not an aviation authority, so nothing here is regulatory advice. Check every requirement with your own authority.

Key takeaways

  • Authorities word this differently. In its 2017 text, the FAA’s AC 120-72A says no FAA regulation mandates specific content, while EASA guidance says initial training should cover a defined syllabus.
  • The 11-topic syllabus in GM1 145.A.30(e) is a useful outline even outside Europe, adjusted to your approval.
  • eLearning suits knowledge, cases and quizzes. Discussion, role-play and competence assessment still need people.
  • Build scenarios from your own de-identified occurrence reports, and tag each decision point to a syllabus topic.
  • Record the course revision each person completed, and reuse the modules for continuation training.

What does human factors training for maintenance staff cover?

Human factors training for maintenance staff covers how people perform, make errors and recover while doing maintenance work. Typical content includes human error, communication, teamwork, situational awareness, fatigue and stress, procedures, tools and the physical work environment. The aim is changed behavior at the aircraft, not definitions to memorize.

The FAA’s Advisory Circular 120-72A, “Maintenance Human Factors Training” (April 11, 2017), lists sample topics such as safety culture and organizational factors, human performance and limitations, the physical work environment, human error, communication at work and hazards in the workplace. Public course pages add the error chain and the Swiss Cheese Model, as of October 2026.

What do regulators say about human factors training for maintenance staff?

In its 2017 text, FAA Advisory Circular 120-72A says no FAA regulation mandates specific content for maintenance human factors training. EASA’s Part-145 guidance says initial training should cover a defined syllabus. In both systems the authority approves the organization’s program, not a vendor’s course.

What does the FAA say?

The FAA’s AC 120-72A says it “Is not mandatory, like any AC, and does not constitute a regulation.” It also states: “There are no FAA regulations that mandate specific content requirement for MxHF content.” Its applicability list includes part 145 repair stations and part 147 schools.

Separately, 14 CFR 145.163 requires a repair station to have and use an employee training program approved by the FAA, with initial and recurrent training. If your approved program includes a human factors module, changes to that program go through your FAA office. We could not open the eCFR page, so this reading follows Cornell’s copy of the rule.

What does EASA say?

EASA’s AMC2 145.A.30(e), published in ED Decision 2020/002/R, says: “Initial human factors training should cover all the topics of the training syllabus specified in GM1.” It adds: “The syllabus may be adjusted to reflect the particular nature of the organisation.”

Older guidance from Transport Malta (2010) says the organization’s training procedures and trainer qualifications are accepted through approval of its Maintenance Organisation Exposition. It describes continuation training as “of appropriate duration in each two year period.” Confirm the current wording with your authority.

ICAO Doc 9824, Human Factors Guidelines for Aircraft Maintenance Manual (first edition, 2003), is a paid publication. Australia’s CASA attaches a copy to its Advisory Circular 145-02.

Which topics should a human factors training module include?

A maintenance human factors training module should cover the topics your authority expects, and the GM1 145.A.30(e) syllabus is the most detailed public list. The UK CAA’s regulatory library, which hosts the UK version of the same regulation, lists eleven topics. Use them as a checklist, then adjust to your approval.

The table maps each topic to an eLearning treatment. These are our design suggestions, not requirements, and we have not tested them with a regulator.

GM1 topic eLearning treatment Check Still needs a room?
Introduction, safety management, safety risk management Short explainer using your own safety policy and risk matrix Sort hazards by severity No
Safety culture and organizational factors Walk through how a report moves through your system Branching choice with consequences Yes, to discuss trust and reporting
Human error Case timeline with error points Hotspot: find the error point No
Human performance and limitations Demonstrations of attention and memory limits Short quiz No
Environment Photo scenario of a cold, noisy, poorly lit task Hotspot: find the hazards Partly, with a workplace walk-around
Procedures, information, tools and practices Compare a task card with how the job really flows Scenario: find the gap Yes, to discuss real workarounds
Communication Shift handover example in text or audio Rewrite the handover Yes, to practice with a partner
Teamwork Branching case on speaking up Choice with feedback Yes
Professionalism and integrity Case on signing for work Reflection prompt Yes
The organization’s safety program Three screens on your own program and contacts Quiz No

Where the FAA and EASA wording differ, we suggest building to the more detailed outline and writing the approval request in your own authority’s terms.

What can human factors training do online, and what still needs a room?

Online human factors training works for knowledge, case analysis and quizzes, and it reaches every shift and site on the same revision. A room still suits discussion of real incidents, role-play of speaking up, and competence assessment by a supervisor. Whether online delivery is acceptable is for your authority to decide.

The FAA’s AC 120-72A points to existing multimedia, web-based and eLearning materials, and it does not prescribe a delivery method. EASA’s GM2 145.A.30(e) lists “Knowledge of human factors, human performance and limitations” among competences assessed for most function groups. A quiz proves knowledge only.

  • Choose eLearning for: initial knowledge across several sites, continuation refreshers, and case libraries that grow over time.
  • Do not rely on eLearning alone for: reporting culture, assertiveness practice, and any element your authority expects to be observed.

Pro tip: Pair Each Module With a Ten-Minute Huddle. Add a one-page card for supervisors with three discussion questions drawn from the module’s case. The online part gives everyone the same facts. The huddle shows whether they match how your shop works.

How do you build a realistic maintenance scenario for human factors training?

Build a maintenance scenario from one of your own de-identified occurrence or near-miss reports, then split it into decision points where the learner chooses the next step. Frame the case around conditions and choices, not around blaming a person. Generic stories are easier to dismiss than events your technicians recognize.

Follow these steps for each case:

  1. Pick a closed report. Remove names, tail numbers and dates, and get your safety or quality manager’s approval before use.
  2. Write the timeline in six to eight beats. Examples are shift start, task card, interruption, handover and sign-off.
  3. Mark three or four decision points. Choose moments where a different action was available.
  4. Tag each point to a syllabus topic. Add one Dirty Dozen factor or SHELL interface where it fits.
  5. Write feedback that explains the condition. Say what would have stopped the error, not only whether the answer was right.
  6. Review with technicians. Ask two technicians and a supervisor to remove any wording that sounds like blame.

For the branching mechanics, see our guide to scenario based learning for soft skills. The flight-crew version of the same method is in CRM eLearning scenario design.

How do you use the Dirty Dozen and the SHELL model without making posters?

The Dirty Dozen and the SHELL model are two common frameworks in maintenance human factors training. The Dirty Dozen lists twelve conditions that contribute to errors. SHELL describes how a person, called Liveware, interacts with Software, Hardware and the Environment. Use both as tags for scenario decision points rather than lists to memorize.

According to SKYbrary, Gordon Dupont developed the Dirty Dozen in 1993 while working for Transport Canada. The twelve are lack of communication, distraction, lack of resources, stress, complacency, lack of teamwork, pressure, lack of awareness, lack of knowledge, fatigue, lack of assertiveness and norms. SKYbrary notes the list is not comprehensive: ICAO Circular 240-AN/144 identifies over 300 error precursors.

SKYbrary’s ICAO SHELL page credits Edwards (1972) with the concept and Hawkins (1975) with the diagram. It describes four interfaces: Liveware-Liveware, Liveware-Software, Liveware-Hardware and Liveware-Environment. In a task-card case, a confusing step is a Liveware-Software issue.

How do you assess human factors training and keep records?

Assess human factors training with scenario questions that test decisions, and record each completion by learner, course revision and date. A quiz proves knowledge only. Your organization assesses competence under its own procedure, so keep the quiz result separate from any competence sign-off.

SCORM and xAPI can both pass completion and score data to a learning management system. Put the revision number in the course title and in the exported package, so a record shows which version a person took. Our guide to course version control when regulations change covers the process. Ask your authority how long records must be kept.

Pro tip: Rotate Cases for Continuation Training. Keep a pool of eight to ten scenarios and show each learner a different subset every cycle. Add one case from your latest audit findings.

How long should human factors training run, and how often should it repeat?

Public maintenance human factors courses run from about two hours to a five-day classroom, so length is a design choice, not a rule. Repeat frequency depends on your authority. Transport Malta’s 2010 guidance used “each two year period,” while Canada’s advisory TAA 2017-03 says recurring training should not exceed 36 months.

Published course lengths, as of October 2026, come from providers and are not regulatory:

  • Computer Training Systems and Quality Training Portal: about two hours.
  • infoWERK Part-145 initial course: seven hours.
  • IATA Human Factors in Aviation: five days (40 hours) in a classroom, for many aviation roles.

We suggest eight to ten modules of 10 to 20 minutes. Initial training uses all of them, and continuation training uses a changing subset.

What should you do next?

Start with a one-page specification: your authority’s wording, the program section it sits in, and the blueprint above. Then storyboard two scenarios from closed occurrence reports. Our posts on turning maintenance procedures into training modules and on what regulators accept for aviation eLearning cover the neighboring questions.

Disclosure: SimpliAuthor and SimpliTrain are made by the same company that publishes this site. Based on the vendors’ published pages, and not tested for this post, SimpliAuthor lets you upload up to five source documents to build an outline. The SimpliTrain aviation page says it tracks certifications and renewals with expiry alerts and supports SCORM 1.2, xAPI and cmi5.

Neither product, nor any course built with it, is approved by a regulator. Approval stays with your authority and your approved program.

Frequently asked questions

What is human factors training in aviation maintenance?

Human factors training in aviation maintenance teaches personnel how human performance limits and workplace conditions affect maintenance quality. It covers human error, communication, teamwork, fatigue, procedures and the work environment. The goal is to help technicians, inspectors and managers recognize error-prone situations and apply habits that catch mistakes before an aircraft returns to service.

Is human factors training mandatory for maintenance technicians?

It depends on your authority. In its 2017 text, FAA AC 120-72A says no FAA regulation mandates specific content for maintenance human factors training. EASA’s AMC2 145.A.30(e) says initial human factors training should cover the GM1 syllabus. Confirm the current rule with your authority, because this answer is not regulatory advice.

What topics are in the EASA human factors syllabus?

The GM1 145.A.30(e) syllabus, as published by the UK CAA, lists an introduction to safety management and human factors, safety risk management, safety culture, human error, human performance and limitations, environment, procedures, information, tools and practices, communication, teamwork, professionalism and integrity, and the organization’s safety program. Confirm against the current EASA text.

What is the Dirty Dozen in aircraft maintenance?

The Dirty Dozen is a list of twelve conditions that contribute to maintenance errors, including lack of communication, fatigue, pressure, complacency and lack of assertiveness. According to SKYbrary, Gordon Dupont developed it in 1993 at Transport Canada. It is an introduction to human error, not a complete list, and works best as a tagging tool.

Can human factors training be done online?

Parts of it can. Providers publish online maintenance human factors courses, and the FAA’s AC 120-72A points to web-based and eLearning materials. Discussion, role-play and competence assessment usually need people. Whether online delivery is acceptable for your approved program is for your authority to decide.

How often is recurrent human factors training required?

It depends on your authority. Transport Malta’s 2010 guidance described continuation training “in each two year period,” and Canada’s TAA Advisory 2017-03 says recurring training for its covered organizations should not exceed 36 months. The FAA’s AC 120-72A does not address recurrent training. Check the interval in your own approval.

Want to learn more?

Reach out to us to learn more.

One Platform for
All Your Training Needs

Get a personalized demo.