Illustrated cover reading "Knowledge Checks in Aviation eLearning" on a lilac and peach background with a halftone pattern

Knowledge Checks in Aviation eLearning: A Design Guide for Training Providers

Table of Contents

Share:
Easily share intel
Summarise this page with your favorite AI assistant

Knowledge checks in aviation eLearning are short, low-stakes questions placed inside a lesson. They show the learner, and the course designer, whether a key point landed before the course moves on. They are practice, not the regulator’s exam.

The top search results for this term serve general corporate training and schools. None of the pages we read cover aviation, where an authority controls the formal exam. This guide is for ground schools, maintenance and cabin crew trainers, and airline and airport training teams.

Disclosure: SimpliAuthor and SimpliTrain are made by the same company that publishes this site. We are a content authoring vendor, not an aviation authority. Nothing here is regulatory advice. Check every rule with your own authority.

Key takeaways

  • Split your assessments into three tiers: practice checks, course assessments and the regulator’s exam. Only the first two are yours.
  • Pick the item type from the verb in the learning objective, not from what the authoring tool makes easy.
  • Write feedback for every option, point back to the source section, and avoid trick questions.
  • Let practice checks carry completion only. Reserve pass or fail for one deliberate course assessment, and test it in the client’s LMS.

What are knowledge checks in aviation eLearning?

Knowledge checks in aviation eLearning are brief questions, usually one to five per lesson section, that ask learners to recall or apply a point they just studied. Feedback arrives at once, and the result carries little or no weight. Their job is to teach and to expose gaps, not to certify anyone.

Sources split on grading. Articulate’s glossary says knowledge checks are typically not graded or tracked. iSpring’s guide, updated August 2026, describes scoring options, including partial credit. Both fit different jobs.

Where does a knowledge check end and the regulator’s exam begin?

A knowledge check belongs to your course. A regulator’s knowledge exam belongs to the authority, which decides who may sit it, who may run it and what counts as a pass. Keep the two apart so learners do not mistake practice for readiness.

Three examples follow, as of October 2026. Rules change, so read the current text.

  • United States, eligibility. 14 CFR 61.35 says an applicant for a knowledge test needs an endorsement, if the part requires one, from an authorized instructor certifying that the applicant “accomplished the appropriate ground-training or a home-study course required by this part.” The same section says: “The Administrator shall specify the minimum passing grade for the knowledge test.”
  • United States, delivery. FAA Order 8080.6H, effective September 22, 2017, covers the Airman Knowledge Testing program. It describes organizations authorized by the FAA Administrator and an FAA-approved computer-based testing environment.
  • Europe, maintenance. In the original 2014 text of Regulation (EU) No 1321/2014, point 66.A.25, as published on legislation.gov.uk, the Part-66 basic knowledge examination is conducted either by an appropriately approved training organization or by the competent authority.

Confirm with your authority what exam-related material you may use. Our guide to what regulators accept for aviation eLearning covers how approval works for the course itself.

Tier Who sets it Purpose What the course may record
Practice knowledge check You Teach and expose gaps Nothing, or completion only
Course assessment You, within your approval Confirm module outcomes Score and pass or fail, as your program defines
Regulator’s exam The authority or those it authorizes Formal step toward a credential Nothing: it runs outside your course

Which item type fits which learning objective?

Match the item type to the verb in the learning objective. Single choice suits recall, multi-select suits recognizing every correct item, ordering suits procedures, hotspots suit locating parts on an image, and scenario items suit judgment. The table gives an aviation example for each, written as an illustration, not as approved content.

Objective type Best item type Aviation example (illustration only) Watch out for
Recall a term Single choice “What does MEL stand for?” with three plausible wrong options. Trivia nobody needs from memory.
Recognize every correct item Multi-select “Select every item your station’s pre-departure walkaround covers,” taken from your approved checklist. An unclear credit rule for partly correct answers.
Follow a procedure Ordering “Put the steps of your tool control check in order.” The order must match the current manual revision.
Locate on an image Hotspot “Click the fire extinguisher location on this cabin layout.” Needs a keyboard route and a text alternative.
Judge in context Scenario-based single choice “At shift handover you notice an open task card. What do you do first?” One defensible answer, drawn from the approved procedure.

We left true/false out on purpose, because MSU Denver’s teaching guide calls it easy to guess. For hotspot design, see interactive diagrams in eLearning for aircraft systems.

How do you write knowledge checks that avoid trick questions?

Write each knowledge check item to test one idea from one learning objective, with one defensible answer drawn from your approved material. A trick question punishes careful readers through wording, such as a double negative or a tiny detail. In aviation training, it teaches learners to hunt for traps instead of applying procedures.

eLearning Industry lists treating knowledge checks like exams, testing irrelevant details and poorly written distractors among common mistakes. These rules guard against all three:

  • Put the decision in the stem, not in the options.
  • Build wrong options from real mistakes, so each is plausible.
  • Avoid negatives, “all of the above” and “none of the above.”
  • Test what a person must decide or recall without a manual. If the job allows a lookup, test finding and applying the entry.

Pro tip: Test Items Cold. Ask one SME and one trainer who did not write the item to answer it without the manual. If they pick different answers, or one hesitates, the wording is the problem. Fix the item before you touch the lesson.

When one question is not enough, move to full scenarios. See our guides to branching scenarios for aviation decision-making and CRM aviation training scenarios.

How should you word feedback on a knowledge check?

Feedback on a knowledge check should say whether the answer was right, explain why in one or two sentences, and point back to the source section. MSU Denver’s guide puts it plainly: “Feedback is the most essential component for learning.” A bare “Incorrect” teaches nothing.

Use three patterns and fill them from your own approved material:

  • Correct answer: “Correct. [Procedure name] requires this step because [reason from your manual].”
  • Wrong answer: “Not quite. That option [describes the specific mistake]. Review [section name], then try again.”
  • Partly correct multi-select: “You found [number] of [number] items. Review [section name] for the ones you missed.”

Write separate feedback for each wrong option, because each signals a different misunderstanding. Keep the tone neutral.

How many knowledge checks and retries should a module have?

Most guides suggest one short check after each topic, with about one to five questions and no more than two attempts per question. Sources differ, so treat the numbers as starting points. For aviation modules, tie the count to learning objectives, not to a quota.

eLearning Industry says one to five questions is typical. Neovation’s guide suggests no more than 10 to 15 per check. iSpring recommends no more than two attempts for most types. MSU Denver says to grade for completion so students can retry. None gave research behind its number.

Our recommendation is one to three items per learning objective and two attempts per item. The first miss gets a hint and a pointer to the section. The second miss shows the correct answer, the reason and a link back to the lesson. Retries suit practice checks only. Set attempts on a course assessment according to your approved program.

Should knowledge checks be timed?

Knowledge checks should not be timed. A timer measures speed, not understanding, and it can lock out learners who need more time. The UniversityXP guide warns that timed checks may discourage learners. If you must add a limit, WCAG 2.2 sets rules.

According to the W3C, Success Criterion 2.2.1, Timing Adjustable, is Level A. It requires that for each time limit set by the content, at least one listed condition is true, such as the learner being able to turn it off, adjust it or extend it.

How do knowledge checks report to the LMS in SCORM?

In SCORM, a knowledge check can report nothing, report a score, or help set pass or fail status. SCORM 1.2 uses one status field, while SCORM 2004 splits completion from success. Decide the job of each check before you build, then test it in the client’s LMS.

The run-time reference at scorm.com lists the fields. In SCORM 1.2, cmi.core.lesson_status can be passed, completed, failed, incomplete, browsed or not attempted. In SCORM 2004, cmi.completion_status and cmi.success_status are separate, and cmi.score.scaled is a number from -1 to 1 with a read-only cmi.scaled_passing_score. Our SCORM 1.2 vs SCORM 2004 comparison covers which to export.

Use this order to set up score-based completion:

  1. Choose the one assessment that decides pass or fail. Do not let every practice check vote.
  2. Set the passing score in the course, in the form your LMS reads.
  3. In SCORM 2004, keep completion and success apart, so a learner who finishes but fails shows both facts.
  4. Test the failing path: fail, retry, and close the window early.

We did not test any specific LMS for this guide, so verify reporting before delivery.

How do item banks help knowledge checks stay fresh?

An item bank holds many questions tagged by objective, and the course draws a few at random each time. Randomization makes answer positions harder to memorize and keeps retries useful. It works only if every item in a pool tests the same objective at the same difficulty.

iSpring lists random selection from a question bank as one way to enhance a check. In aviation courses, keep these rules:

  • Tag each item with its objective, source manual and revision.
  • Draw each random set from one objective, so no learner gets an easier check by luck.
  • Review the whole pool when the manual changes, not one item.
  • Check the wording before you retire an item many learners miss. A bad item and a weak lesson look the same in the data.

What should you do next?

Pick one live module and list its learning objectives. Choose an item type for each using the table above, then label every check as a practice check or a course assessment. That exposes lessons with no check and checks that behave like exams.

If you build on SimpliTrain, the vendor’s aviation training management page lists Assessments and Exams, Question Banks, Proctoring, and Certifications and Grading among its features. That is based on the vendor’s published documentation. We did not test those features for this guide, and nothing here means any regulator approves them.

Then show your plan to whoever signs off your training program. Ask where practice ends, which scores your records must hold, and whether any check could be read as an exam.

Frequently asked questions

What is a knowledge check in eLearning?

A knowledge check is a short, low-stakes question set inside or after a lesson. It gives immediate feedback so learners see what they have understood. It is usually ungraded or lightly weighted. Its purpose is learning and gap-spotting, not certification.

What is the difference between a knowledge check and a quiz?

A knowledge check is shorter and lower pressure than a quiz. eLearning Industry describes knowledge checks as very short with low pressure, quizzes as short to medium with medium pressure, and tests as long with high pressure. Quizzes more often carry a score that counts.

How many questions should a knowledge check have?

One to five questions per topic is the common range, though none of the sources we read gave research for its number. Tie the count to learning objectives instead. One to three items per objective suits most aviation modules. Stop adding questions once the check starts to feel like an exam.

Should knowledge checks be graded?

Most practice knowledge checks should not affect pass or fail. Grade for completion so learners can retry and learn. Put scoring on a separate course assessment that your program defines. In SCORM 2004, completion and success are separate fields, so a course can record both without mixing practice results into the final result.

Can a knowledge check replace a regulator’s exam?

No. A knowledge check is part of your course, while the authority controls its own knowledge exams, including who may run them and what counts as a pass. Under 14 CFR 61.35, for example, the Administrator specifies the minimum passing grade for the knowledge test. Confirm any exam-related question with your own authority.

Which question types work best for aviation knowledge checks?

Match the type to the objective. Use single choice for recall, multi-select for recognizing all correct items, ordering for procedures, hotspots for locating parts and scenario-based questions for judgment. Avoid true/false because it is easy to guess, and give each item one defensible answer from approved material.

Want to learn more?

Reach out to us to learn more.

One Platform for
All Your Training Needs

Get a personalized demo.