Aviation eLearning development cost is the labor and licensing needed to design, build, review and maintain a course for an aviation audience. For most teams the labor is the biggest part, so the base formula is development hours per finished hour multiplied by a loaded hourly rate, plus aviation lines for review rounds, subject-matter expert (SME) time, simulations and revisions.
We found no published aviation benchmark, so this post shows the method, its sources and an illustrative example you can replace with your own hours. It reuses the sourced ratios and rate from our course development cost calculator walkthrough.
We are a content authoring vendor, not an aviation authority. SimpliAuthor and SimpliTrain are made by the same company that publishes this site. Nothing here is regulatory advice, and nothing here means any course or tool is approved by any authority. Your authority decides.
Key takeaways
- No public source prices aviation course development per finished hour, so build the number from hours, a rate and aviation add-ons.
- For one finished hour of interactive content, our illustrative model lands between $6,096 and $16,096 in internal labor at a $48 loaded rate. The assumptions are ours.
- Authority review rounds, SME time and revisions are the least certain lines. Published benchmarks for SME review disagree by a factor of five or more, so log your own.
- When a vendor quotes a price, ask for the hours ratio, the rate and the scope behind it.
What does aviation eLearning development cost per finished hour?
Aviation eLearning development cost per finished hour has no published benchmark as of October 2026. Generic vendor guides quote wide ranges, up to $30,000 or more per finished hour, without showing any method. The honest answer is a range you build from hours, rate and scope.
Searching this exact phrase returns mostly learning management system (LMS) roundups and aviation software prices. Those price platforms and apps, not courses.
The generic guides also disagree with themselves. IKHYA’s guide, last modified in April 2026, opens with $3,000 to $15,000 per finished hour, then lists $15,000 to $30,000 or more for highly advanced courses, naming aviation as one example. It cites no source.
How do you calculate aviation eLearning development cost?
To calculate aviation eLearning development cost, multiply finished hours by development hours per finished hour, add percentages for accessibility and review, then multiply total hours by a loaded hourly rate. Add separate lines for SME time, tool seats, translation and hosting. A finished hour is one hour of learner seat time.
The ratios come from the Chapman Alliance’s September 2010 survey of 249 organizations, published as a slide deck. It defines Level 2 as content with 25% or more interactive exercises and Level 3 as “possibly simulation or serious game-based.” The $48 loaded rate is derived in our calculator walkthrough from Bureau of Labor Statistics (BLS) wage and benefit data. It is a proxy, not an aviation designer rate.
| Chapman level | Hours per finished hour (low / average / high) | Labor at $48 (average) | Aviation content we would map here |
|---|---|---|---|
| Level 1 | 49 / 79 / 125 | $3,792 | Narrated slides, policy and awareness material |
| Level 2 | 127 / 184 / 267 | $8,832 | Procedure walkthroughs with knowledge checks |
| Level 3 | 217 / 490 / 716 | $23,520 | Simulations, 3D, branching decision games |
The last column is our judgment, not Chapman’s.
Which cost drivers raise aviation eLearning development cost?
Six drivers separate aviation eLearning development cost from a generic course: authority review, SME time, simulations, 3D or VR assets, accessibility and revisions. Only some have published benchmarks as of October 2026, so the table shows the evidence and how to size each yourself.
| Driver | Evidence we found | How to size it |
|---|---|---|
| Authority review rounds | US rules require approval of programs and revisions (see below). No cost benchmark. | Rounds per release times rework hours per round, from your log |
| SME and technical review | Chapman: 6% of effort. Southampton framework: 30% to 35% of total time. | Log SME hours separately at the SME’s loaded rate |
| Simulation and scenarios | Chapman Level 3 average is 490 hours. Southampton: 40 to 75 hours per branching scenario. | Price each scenario, not the whole course |
| 3D and VR assets | One vendor guide lists $40,000 to $120,000 or more for VR or AR courses. No method shown. | Written quotes with source-file and license terms |
| Accessibility | Southampton framework: plus 35% development time for WCAG 2.1 AA. | Apply as a percentage of base hours |
| Revisions | Vendors cite 15% to 25% a year. The calculator post found no data behind it. | Revisions per year times hours per revision |
How much do authority reviews add to aviation course development?
Authority reviews add rework hours and calendar time, but we found no published figure for either. The rules show that approval covers revisions as well as first versions, so a material course change can trigger another full review cycle that you should budget for.
Under US rules for air carriers, 14 CFR 121.405 says that “To obtain initial and final approval of a training program, or a revision to an approved training program,” a certificate holder must submit an outline to the FAA Administrator. For repair stations, 14 CFR 145.163 calls for an employee training program “approved by the FAA” and says revisions go to the responsible Flight Standards office. Both texts are read as published in October 2026, so confirm the current wording in the official eCFR. Other authorities, including EASA and the UK CAA, have their own rules. Check with yours.
How much SME time should you plan?
Plan SME review as a separate line and expect it to land between Chapman’s 6% of effort and the 30% to 35% of total time in the University of Southampton’s planning framework. Measure your own SME hours on the first course.
The sources measure different things. Chapman counts SME and stakeholder reviews as one task in a survey average. Southampton’s page, last modified in April 2026, calls its figures indicative, cites nothing and uses 35% for healthcare content and 30% for general content. Neither measures aviation. For safety-relevant procedures a licensed engineer or captain must check, we would plan at the higher end until your log says otherwise.
What do simulations and 3D add to the budget?
Simulations and 3D move a course from Chapman’s Level 2 to Level 3, where the survey average rises from 184 to 490 hours per finished hour. Some Level 3 respondents reported more than 2,000 hours. Price a simulation as an add-on.
The Southampton framework adds about 40 to 75 hours per branching scenario. For 3D, ask whether manufacturer models or photos can be licensed for training and whether you receive source files, because both change update cost.
What does a worked aviation eLearning development cost example look like?
A worked example for one finished hour of Level 2 aviation content gives roughly 127 to 335 total hours, or $6,096 to $16,096 at a $48 loaded rate, depending on the ratio, accessibility work and a review allowance. Every percentage below is an assumption you should replace.
| Line (illustrative) | Lean | Typical | Aviation full |
|---|---|---|---|
| Ratio (Chapman Level 2) | 127 (low) | 184 (average) | 184 (average) |
| Base hours (1.0 finished hour) | 127.0 | 184.0 | 184.0 |
| Accessibility, plus 35% | none | none | plus 64.4 |
| Review allowance (our assumption) | 0% | 20% | 35% |
| Total hours | 127.0 | 220.8 | 335.3 |
| Labor at $48 per hour | $6,096 | $10,598 | $16,096 |
| Per learner at 400 learners | $15.24 | $26.50 | $40.24 |
The Typical column uses the 20% buffer from the calculator post’s example. The 35% in the last column is our placeholder for a course that goes through authority review, not a benchmark. The table covers internal labor only. It leaves out SME time at their own rate, tool seats, translation, hosting and any authority fees, which we did not research.
Pro tip: Log Review Rounds From Day One. Record every review round in one line: who reviewed, hours of rework and days waiting. After two courses, replace the placeholders with your own numbers.
How much does it cost to keep an aviation course current?
Keeping an aviation course current costs revisions per year multiplied by the hours each revision takes, at the same loaded rate. Vendor guides cite 15% to 25% of build cost a year, but the calculator post found no data behind that range, so a revision log is a better basis.
Here is an invented example. A course needs three revisions a year, each taking 16 hours of design and quality assurance plus 4 hours of SME review. That is 60 hours, or $2,880 at $48, about 27% of the $10,598 Typical build. The inputs are made up.
If your approved program covers the course, a change may need submission before release. For managing that, see our guides to course version control when regulations change and aviation course version control. To see who approves what, read what regulators accept for aviation eLearning.
Can you still use 2010 hours-per-finished-hour figures for aviation eLearning?
You can use the Chapman Alliance ratios from 2010 as a starting range for aviation eLearning, but not as a final estimate. They are 16 years old, predate AI assistance and were never aviation-specific. Replace them with your own logged hours after two or three courses.
Newer evidence points the same way. In an April 2025 update to her time-estimates post, Christy Tucker cut her estimate for one three-hour, mostly linear course from 450 to 367 hours, about 122 hours per finished hour, citing AI help with analysis, drafting, images and narration. That is one project with no branching or video, so it is a data point, not a benchmark.
What should an aviation eLearning development quote include?
An aviation eLearning development quote should state the hours ratio, the hourly rate, the interactivity level, the number of review rounds, the price of later revisions and who owns the source files. Without those items you cannot compare quotes or check them against the formula above.
Use this checklist when you compare quotes:
- Scope: finished minutes, interactivity level and number of scenarios or simulations.
- Rate and hours: the loaded rate and estimated hours by task.
- Review: rounds of SME and authority-driven rework included, and the price of an extra round.
- Revisions: a per-revision price for post-launch changes.
- Assets: ownership of source files, 3D models and media licenses.
- Exports: SCORM or xAPI package type and testing in your LMS.
To turn cost into a client price, see how to price eLearning development.
What should you do next?
Pick one course you already built, add up the hours by task and run it through the worked example. With no log, use the Typical column as a first estimate and mark every percentage as an assumption. Then log the next course properly.
If authoring time is the line you want to cut, SimpliAuthor, our own product, positions its AI course creation as authoring content “up to 9× faster” on its AI course authoring page. We did not test that claim, and it says nothing specific about aviation. Test it on one of your own courses and log the hours.
For scheduling and certification tracking, which SimpliTrain’s aviation page describes, you can request a SimpliTrain demo. We did not test those features, and SimpliTrain is from our own company, so weigh that accordingly.
Frequently asked questions
How much does aviation eLearning cost to develop?
No public source gives an aviation-specific figure. Using Chapman Alliance’s 2010 ratios and a $48 loaded rate, one finished hour of interactive content costs roughly $6,096 to $16,096 in internal labor in our illustrative model. Simulations, 3D, SME time, translation and tools come on top. Replace our assumptions with your own logged hours.
How long does it take to develop one hour of aviation eLearning?
Chapman Alliance’s 2010 survey reports 127 to 267 development hours per finished hour for Level 2 interactive eLearning, with an average of 184. Aviation-specific figures are not published. Authority review adds waiting time, and we found no benchmark for how long it takes.
Does regulator approval add to course development cost?
It can, through review rounds, rework and waiting time, but we found no published cost figure. Rules such as 14 CFR 121.405 for air carriers require approval of training programs and their revisions. Check which approval covers your course, because it varies by authority.
How much does it cost to update an aviation eLearning course?
Estimate it as revisions per year times hours per revision times your loaded rate. Vendor guides cite 15% to 25% of build cost a year, but our calculator post found no data supporting that range. A revision log from your first course gives a defensible number.
Do simulations and 3D cost much more than standard eLearning?
Usually, yes. Chapman’s Level 3 average is 490 hours per finished hour against 184 for Level 2, and some respondents reported more than 2,000. One vendor guide lists $40,000 to $120,000 or more for VR or AR courses with no method shown. Get written quotes per scenario.
What should I ask for in an aviation eLearning development quote?
Ask for the interactivity level, estimated hours by task, the hourly rate, the number of included review rounds, a per-revision price, source-file ownership, LMS testing and a list of exclusions. These items let you compare quotes against the formula in this post.



