Ground handling training is the instruction and assessment that prepares ramp, baggage, load control and passenger staff to do aircraft turnaround work safely. For ramp safety modules, the working rule is simple. eLearning teaches the knowledge, and a competent assessor signs off the practical skills on the ramp itself.
This guide is for training providers and ground handler training teams who build ramp safety content. It shows which sources set expectations, gives a module blueprint, and ends with a sign-off record you can copy.
We are a content authoring vendor, not an aviation authority, and nothing here is regulatory advice. Your approval, airport and customer airlines decide what you may deliver online.
Key takeaways
- eLearning can carry ramp safety knowledge, but hand signals, equipment operation and behavior around aircraft need observed practice on the ramp.
- Each source does a different job: US Part 139 covers movement and safety areas, IATA AHM chapter 11 sets an industry training standard, and HSE and OSHA describe hazards.
- Build each module around one hazard and one observable behavior, and write the ramp assessment line before the screens.
- Record the quiz score and the ramp sign-off as two separate results for every person.
What does ground handling training for ramp safety need to cover?
Ground handling training for ramp safety needs to cover the hazards of the aircraft turnaround: engines running, moving vehicles, ground support equipment, manual handling, falls from height, fuel and fumes, and team communication. The UK Health and Safety Executive (HSE) says many of its serious accident reports come from turnaround.
In its aircraft turnaround guidance, updated June 2026, HSE says “A significant proportion of the serious accidents reported to HSE occur during aircraft turnaround.” It also states that “no-one should approach an aircraft while the engines are running and the anti-collision lights are on,” except in very specific circumstances.
The US Occupational Safety and Health Administration (OSHA) lists related hazards on its airline industry hazards page: plane-side baggage loading, workers struck by vehicles on aprons, carbon monoxide in idling truck cabs during refueling, and falls from height during catering.
Roles matter as much as hazards, so give each role, such as tug driver, marshaller or loader, its own module list.
Which rules and standards shape ground handling training?
No single document sets ramp safety training everywhere. Airport rules, industry standards and workplace safety guidance each do a different job, and your authority, airport or customer airline decides which apply to you. The table summarizes what each source says, based on the texts we read in October 2026.
| Source | What it is | What matters for training | Who sets or checks it |
|---|---|---|---|
| 14 CFR 139.329 | US airport certification rule | Training on movement and safety area procedures before first duty, then every 12 consecutive calendar months | FAA, through the airport |
| IATA AHM chapter 11 (AHM 1110) | Industry training standard | Minimum training for frontline ramp, baggage, passenger and load control staff | IATA, by contract or audit |
| ISAGO | IATA audit program | Training assessed against “Training (TRN) AHM 1110” | IATA auditors |
| HSE turnaround page | UK regulator guidance | Risk assessment, cooperation, contractor control | HSE |
Does US Part 139 cover ramp training?
Part 139 covers training for people who work in movement areas and safety areas of certificated airports, not the ramp as such. The FAA defines a movement area as the runways, taxiways and other taxi, takeoff and landing areas “exclusive of loading ramps and aircraft parking areas.”
Under 14 CFR 139.329(e), certificate holders must ensure people are trained “prior to the initial performance of such duties and at least once every 12 consecutive calendar months” before moving on foot or driving in those areas. The movement area definition is in 14 CFR 139.5.
So a tug driver who crosses a taxiway is within the text, while a ramp-only course may not be. We read these sections on the Cornell Legal Information Institute copy, which lists amendments through February 2023. Confirm the current wording on the official eCFR.
What do IATA AHM chapter 11 and ISAGO add?
Chapter 11 of the IATA Airport Handling Manual, known as AHM 1110, is the industry’s ground operations training program. IATA is an airline trade association, not a regulator, so AHM 1110 applies through contracts and audits rather than as law.
IATA’s May 2023 Training Passport white paper calls AHM 1110 “a minimum standard training requirement for frontline personnel.” It adds that chapter 11 covers trainer qualifications and how training is managed and monitored. IATA describes ISAGO as “an accreditation program that verifies GHSP compliance with leading industry standards,” where GHSP means ground handling service provider.
IATA calls the Airport Handling Manual policy driven (what to do) and its Ground Operations Manual (IGOM) procedure driven (how to do it). Both are IATA publications, so check the license before reusing their text.
Do OSHA and HSE set ramp training content?
Neither page we read sets a ramp training syllabus. HSE says every company in a turnaround should assess risks, cooperate with other employers, manage contractors and monitor activity. OSHA’s page names hazards but no ramp-specific training program. Use both to choose hazard topics, and use your approved procedures to set the content.
Which ramp safety modules should a ground handling course include?
A ramp safety course works best as a set of short, hazard-based modules, each tied to one observable behavior. The blueprint below lists eight modules, what the eLearning teaches and what an assessor should watch on the ramp. Adapt it to your approval, customer airlines and airport rules.
| Module | eLearning teaches | Assess on the ramp | Source anchor |
|---|---|---|---|
| 1. Airside environment and turnaround | Zones, sequence, roles | Point out hazard zones on a stand | IATA ramp course topics |
| 2. Engines running and aircraft danger areas | Approach rules, anti-collision lights | Approach and hold at an arrival | HSE turnaround page |
| 3. Ground service equipment | Pre-use checks, speed and parking rules | Inspect and operate under observation | IATA ramp course, AVIW3004 |
| 4. Marshalling and hand signals | Signal names and meanings | Give signals to a real or simulated movement | IATA signals course, Sofema |
| 5. Pushback team communication | Headset, wing walker, tug driver roles | Role-play a pushback | IATA signals course topics |
| 6. Loading and manual handling | Posture, equipment, wet and icy surfaces | Observed loading technique | OSHA ramp eTool |
| 7. Vehicles, fuel and fumes | Strike risks, idling vehicles near fueling | Observed routes and parking | OSHA hazards page |
| 8. Emergencies, reporting and security awareness | What to report, and to whom | Drill or simulated report | IATA ramp course (security awareness) |
This blueprint is our own. We built it from the topics in IATA’s ramp services course and the hazards named by HSE and OSHA. It is not an IATA or regulator syllabus.
Pro tip: Write The Assessor Line First. Before drafting any screens, write one sentence saying what an assessor will see the learner do on the ramp. If you cannot write it, the module is only information, and it belongs in a briefing or job aid.
What can move online in ground handling training, and what needs the ramp?
In ground handling training, eLearning suits knowledge: hazard recognition, signal meanings, procedure order and policy. Skills such as giving marshalling signals or operating equipment need observation by a competent assessor on the ramp or in a workplace-like setting. Your authority and customers decide what is acceptable.
The published course formats we read show the split:
- IATA’s Aircraft Marshalling and Ramp Hand Signals course is about 45 minutes of self-study, ending in an unsupervised online exam of 15 multiple-choice questions.
- IATA’s Airport Ramp Services with IGOM course lists about 44 hours of self-study and a remotely supervised online exam of 100 multiple-choice questions.
- Sofema Aviation Services lists a one-day ramp safety and marshalling course: four hours of theory, then four of practical in groups of six to eight.
- Australia’s unit AVIW3004, Operate ramp equipment (release of January 2019), says “Assessment must occur in workplace operational situations.” It allows simulated situations that reflect workplace conditions where workplace assessment is not appropriate.
A multiple-choice exam shows that someone knows the signals. It cannot show they can give them clearly in front of a moving aircraft. That gap is why the ramp sign-off stays a separate step. Simulators can add practice before the ramp, but the simulator vendor page we read states no regulatory acceptance, so treat them as preparation. Our guide to blended learning design covers how to decide what moves online and what stays in the room.
How do you build ground handling training modules step by step?
Build each ground handling training module in six steps: choose the role and hazard, write the observable behavior, draft content from your approved procedures, add scenario checks, package it with tracking, and link it to a ramp sign-off. Start from your own procedures, not copied manuals.
- Choose the role and one hazard. The Training Passport white paper says AHM 1110 defines modules for each job role. Start with one role and one hazard.
- Write the observable behavior. For example: “holds outside the danger area until the engines are off and the anti-collision lights are off.”
- Draft content from approved procedures. Turn written procedures into short screens, as in SOP to training for frontline staff.
- Add scenario checks. Show a stand diagram and ask the learner to find the hazard. Keep signal charts on a pocket card, as in job aids vs eLearning.
- Package with tracking. Export to SCORM or xAPI with a knowledge pass mark, kept separate from the ramp result.
- Link the ramp sign-off. Add the assessment checklist to your records before launch.
How should you record competency and refresher training for ramp staff?
For each person and module, record the knowledge result, the practical sign-off, the assessor, the date and the refresher due date. The IATA Training Passport white paper says training records should show the “competency achieved” and the passing score, which is a sound minimum to copy.
Use this competency record template as a starting point:
- Person, role and employer
- Module name and version
- eLearning score and date
- Assessor name and qualification
- Ramp assessment date and location
- Observed behaviors, item by item
- Coaching notes and reassessment date
- Refresher due date and who set the interval
The refresher interval comes from your authority, employer or customer contract. The 12-month period in 14 CFR 139.329(e) applies only where Part 139 applies. IATA’s Knowledge Hub said in December 2022 that training ground personnel can take up to six months, so plan for a long ramp-up.
Pro tip: Keep Two Pass Marks. Store the quiz score and the ramp sign-off as separate fields, so nobody shows as complete before an assessor has watched them work. Reports then show who is waiting for an assessor.
What should you do next?
Pick one role and one hazard, such as the tug driver and engines running. Write the assessor line, build a short knowledge module from your approved procedure, and agree the ramp sign-off with your assessor. Then ask your authority whether the split is acceptable.
Dangerous goods and safety management are separate courses with their own requirements. Link to them instead of rebuilding them: see dangerous goods awareness eLearning and safety management system training content.
To schedule ramp assessments and track refresher dates, SimpliTrain has an aviation training management page. SimpliTrain is made by the same company that publishes this site. As of October 2026, the page says it offers certification tracking with alerts 90, 60 and 30 days before expiry. Those are vendor claims we did not test, and no tool makes a course approved by an authority.
Frequently asked questions
What training do ramp agents need?
Ramp agents need employer-defined training on airside safety, equipment, procedures and emergencies, plus any airport or authority requirements. IATA’s AHM 1110 sets a minimum standard for frontline ramp training where it is adopted. Requirements differ by country, airport and airline, so check with your authority and customer airlines.
Is ground handling training mandatory?
It depends on the rule that applies. In the US, 14 CFR 139.329 requires training for people who move on foot or drive in movement areas and safety areas, at least every 12 consecutive calendar months. Rules for other ramp work vary by country, airport and contract, so check with your authority. This is not legal advice.
How long does ground handling training take?
IATA said in December 2022 that training ground personnel can take up to six months. Individual courses are shorter. IATA’s Airport Ramp Services with IGOM course lists about 44 hours of self-study, and one provider lists a one-day ramp safety and marshalling course with four hours of theory and four of practical.
Can ground handling training be done online?
Knowledge parts, such as hazard recognition and procedures, can often be taught online, but acceptance depends on your approval and customers. Practical skills such as marshalling are usually observed on the ramp. IATA’s marshalling e-learning ends with an unsupervised multiple-choice exam, so treat it as knowledge, not a practical sign-off.
What is ISAGO?
ISAGO is IATA’s safety audit program for ground operations. IATA calls it an accreditation program that verifies ground handling service provider compliance with industry standards, and its audits assess training against AHM 1110. It is an industry program run by IATA, not a government approval.


