Your eLearning development cost is what it takes your team to produce one finished hour of learner seat time. Your price to a client is that cost plus a target margin, protection against scope changes and any support after launch. Most published figures describe the cost, not the price, which is why copying them goes wrong.
This guide is for training providers, agencies and freelancers who build courses for clients and must quote them without guessing. Published ranges run from about $3,000 to $180,000 per finished hour (as of October 2026).
Below: why the numbers disagree, how to calculate your own cost, which pricing model fits, a worked quote with the arithmetic shown, and what a quote must say. Contract terms vary by country and client, so treat this as a method, not legal or tax advice.
Key takeaways
- A finished hour is one hour of learner seat time, not build time. Check the unit before comparing prices.
- Published per-hour figures disagree because they measure different things: internal cost, freelancer fees, agency prices or delivery cost.
- Price equals cost divided by one minus your target margin. A 35 percent markup gives only a 25.9 percent margin.
- A fixed fee on a written scope protects margin. Time and materials suits unclear scope.
Why do published eLearning development cost figures disagree so much?
Published eLearning development cost figures disagree because they measure different things: a team’s internal production cost, a freelancer’s fee, an agency’s all-in price, or the cost of delivering learning that already exists. Ranges also mix units, such as per finished hour, per course and per learner hour. Match the unit before comparing any number.
| Source | Published figure | What it actually measures |
|---|---|---|
| Chapman Alliance study (2010) | Average internal cost per finished hour: $10,054 (Level 1), $18,583 (Level 2), $50,371 (Level 3) | Internal spending reported by 249 organizations; 16 years old |
| eLearning Solutions Lab guide (2026) | $10,000 to $20,000 per finished hour for Level 2; $15,000 to $35,000 for a full-service agency | Vendor estimates, mostly unsourced |
| Express eLearning guide (2026) | Freelancer $3,000 to $10,000; custom agency $15,000 to $50,000 or more per finished hour | Vendor estimates by provider type. |
| VertoLaunch guide (2026) | Agency benchmarks from $45,000 to $65,000 (Level 1) up to $120,000 to $180,000 (Level 4) per finished hour | Agency benchmarks the page calls a “market reference, not a quote” |
| ATD State of the Industry (2025) | $165 per learning hour in 2024 | Cost per hour of learning used (delivery), not the price to build a course |
A basic Level 1 hour costs $5,000 to $10,000 in one 2026 guide and $45,000 to $65,000 in another. For a provider, a market range is a sanity check on your quote, never the input to it.
Most of these guides lean on the Chapman Alliance study “How Long Does it Take to Create Learning?” from September 2010. An eLearning Industry article (updated 2021) warned that such studies may overstate current development times, so replace them with your own timesheets as soon as you can.
What does eLearning development cost you to build, per finished hour?
Your eLearning development cost per finished hour is the production hours needed for one hour of learner seat time, multiplied by your loaded hourly rate, plus direct costs such as media assets and tool licenses. Chapman Alliance gives starting hour ratios, but your own timesheets give the number you should price from.
According to Chapman Alliance’s 2010 survey, the average ratios were 79 development hours per finished hour for Level 1 (basic), 184 for Level 2 (interactive) and 490 for Level 3 (advanced). Interactivity is the biggest swing factor, so name it in every quote.
Your cost per finished hour has four parts:
- Labor: production hours times a loaded rate (pay plus overhead).
- Management and review: project management and review-round time.
- Direct costs: stock media, voiceover and a share of authoring tool licenses.
- Contingency: a buffer for rework.
Our course development cost calculator walkthrough shows the hours-per-finished-hour model in detail. For the license line, our Articulate 360 pricing breakdown lists the per-seat price as of October 2026 ($1,749 per seat per year for Teams).
Pro tip: Time Three Projects Before You Trust Any Ratio. Log hours by phase (analysis, storyboard, build, review, QA) on your next three jobs. The phase that overshoots the ratio most is where your quote needs a written assumption, not a higher rate.
Which pricing model should you use for client eLearning projects?
The pricing model for client eLearning projects should match how clear the scope is. Use a fixed fee when the scope is written down, time and materials when it is not, a retainer for ongoing updates, and per finished hour as an estimating shortcut. Each model moves risk between you and the client.
| Model | How it works | Choose it when | Avoid it when |
|---|---|---|---|
| Fixed fee per project | One price for a written scope with set review rounds | Scope, SME access and source content are known | Source content is unfinished |
| Per finished hour or minute | A rate per hour of seat time, multiplied by course length | You sell repeatable course types at a known level | Interactivity varies widely inside one course |
| Time and materials | Hourly billing against a rate card, usually with an estimate or cap | Discovery work, unclear scope, rescue projects | The client needs one number for budget approval |
| Monthly retainer | A fixed monthly fee for an agreed pool of hours | Ongoing updates across several courses | One-off builds |
| License or per-seat | The client pays to use a finished course, per learner or per year | You own a reusable course and sell use rights | The client paid for a custom build |
This table is our own framework. In a 2021 Adobe eLearning community thread on how freelancers prefer to get paid, commenters favored a fixed price on a clearly defined statement of work, hourly billing for out-of-scope changes and, on long projects, an upfront percentage with the balance on completion.
Pro tip: Quote Two Options, Not One. Offer a narrated Level 1 version and an interactive Level 2 version of the same course, each with its own price. Interactivity is the largest cost driver in Chapman’s ratios (79 versus 184 hours), so the client picks a level instead of negotiating your rate.
How do you turn your eLearning development cost into a client price?
To turn your eLearning development cost into a client price, add a contingency to your total cost, choose a target gross margin and divide the cost by one minus that margin. A 35 percent margin on a $5,963 cost gives a price near $9,200. Dividing by one minus the margin is not the same as adding a markup.
Are you applying margin or markup?
Margin is profit as a share of the selling price, while markup is profit as a share of your cost. According to Zoho’s markup versus margin guide, margin equals (price minus cost) divided by price, and markup equals (price minus cost) divided by cost. Mixing them up quietly underprices a quote.
Solving the margin formula for price gives price equals cost divided by (1 minus margin). On a $5,963 cost, a 35 percent markup gives a price of $8,050, but the margin is only 25.9 percent. To earn a true 35 percent margin you need $5,963 divided by 0.65, which is $9,174, rounded to $9,200.
What does a worked quote look like for a 30-minute interactive module?
A worked quote for a 30-minute Level 2 interactive module starts with 92 production hours, which is half of Chapman’s 184-hour average, and ends at a client price of about $9,200. Every input below is an assumption for illustration, so replace each one with your own number.
| Line | Assumption | Amount |
|---|---|---|
| Production labor | 0.5 finished hour x 184 hours x $48 loaded rate | $4,416 |
| Project management | 12 percent of production labor | $530 |
| Tool license share | $1,749 seat across 10 courses a year | $175 |
| Assets and voiceover | Stock media and narration | $300 |
| Subtotal direct cost | Sum of the four lines above | $5,421 |
| Contingency | 10 percent of the subtotal | $542 |
| Total cost | Subtotal plus contingency | $5,963 |
| Client price | $5,963 divided by 0.65 (35 percent margin), rounded | $9,200 |
| Price per finished hour | $9,200 x 2 (cost per finished hour: $11,926) | $18,400 |
The $48 loaded rate is the one in our cost calculator post, and the 12 percent, 10 percent, 10-course and 35 percent figures are our own picks, not benchmarks. A price of $18,400 per finished hour sits near Chapman’s 2010 average internal cost for Level 2 ($18,583) and inside the $10,000 to $20,000 range one 2026 guide gives for Level 2. Treat that as a sanity check, not a target.
What should an eLearning development cost quote include?
An eLearning development cost quote should state the deliverable, the interactivity level, who supplies source content, the number of review rounds, how changes are priced and what happens after launch. These written assumptions protect the margin you calculated, because an unwritten expectation is where a fixed fee leaks.
A complete quote lists these items:
- Deliverable: finished minutes, interactivity level and output format (SCORM 1.2, SCORM 2004 or xAPI).
- Inputs: who supplies source content, SME availability and brand assets.
- Review rounds: how many, who signs off and client response times.
- Change orders: what counts as out of scope, the hourly rate and written approval before work starts.
- Payment: deposit and milestone percentages.
- Ownership: who owns source files and who may reuse the course.
For review rounds, our course development process for small training teams recommends one review round per gate, plus a short verification pass, written into the project brief. Price any extra round instead of arguing about it later.
Maintenance needs its own line. Three 2026 vendor guides (Express eLearning, Blue Carrot and eLearning Solutions Lab) each suggest 15 to 25 percent of build cost per year for updates, and none cites data. On the $9,200 example that is $1,380 to $2,300 a year. Test the range against your own change history, and see our SCORM rescue checklist for old client courses for what an update actually involves.
How should you present the price so the client can compare it?
Present your eLearning price as a priced scope, not a bare number. Show the length, interactivity level, review rounds and exclusions, then offer two or three options. Clients who see what drives the price compare scope with scope, instead of comparing your total with a cheaper quote built on different assumptions.
Before you send a quote, check three things:
- Is the price per finished hour inside the published ranges? If not, find out whether the unit, the scope or your estimate is the cause.
- Does every assumption behind the price appear in the written scope?
- If the client halves the budget, which goes first: interactivity, length or media?
The third answer turns a price negotiation into a scope negotiation, so you trade deliverables instead of discounting.
What should you do next?
Pull the hours from your last three projects and rebuild the worked table with your own numbers. Then add the assumptions list to your next quote and price one Level 1 alternative.
If you sell under a client’s brand, our guide to white-label eLearning for corporate clients covers the contract and delivery side.
SimpliAuthor and SimpliTrain are made by the same company that publishes this blog. If you also deliver and track the courses you sell, SimpliTrain is a training management system with a built-in LMS for instructor-led, virtual and blended training. You can request a SimpliTrain demo to see it.
Frequently asked questions
How much does it cost to develop one hour of eLearning?
It depends on interactivity, media and who builds it, so published figures run from about $3,000 to $180,000 per finished hour as of October 2026. Chapman Alliance’s 2010 survey reported average internal costs of $10,054, $18,583 and $50,371 for Levels 1, 2 and 3. Price from your own hours.
What is a finished hour of eLearning?
A finished hour of eLearning is one hour of learner seat time in the completed course, not one hour of build time. Chapman Alliance’s 2010 averages show 79 to 490 development hours per finished hour, depending on interactivity level. Always confirm the unit before you compare quotes or published prices.
How much should you charge for an eLearning course?
Charge your total cost divided by one minus your target margin, then check the result against published ranges. A $5,963 cost at a 35 percent margin gives about $9,200. Choose a margin that covers non-billable time and risk, because the guides we reviewed give no sourced benchmark.
Should you charge per hour or per project for eLearning development?
Charge per project when the scope is written down and per hour when it is not. In a 2021 Adobe eLearning community thread, commenters favored a fixed price on a defined statement of work, with hourly billing for out-of-scope changes. A retainer suits ongoing updates.
What profit margin should an eLearning development company aim for?
The guides we reviewed give no sourced benchmark, so set your own. One eLearning Industry guide, updated in 2024, uses 5 or 10 percent only as an example and says the right figure depends on market, competition and demand. Cover non-billable time, rework risk and licenses first.
What is a change order in eLearning development?
A change order is a written agreement that adds cost or time when a client asks for work outside the agreed scope. Commenters in a 2021 Adobe eLearning community thread suggested billing out-of-scope changes hourly and writing the terms into the statement of work. Get written approval before starting the extra work.



