Illustrated cover reading "Course Development Cost Calculator" on a lilac and peach background with a confetti pattern

Course Development Cost Calculator: A Walkthrough for Training Providers

Table of Contents

Share:
Easily share intel
Summarise this page with your favorite AI assistant

Course development cost is the total labor and tool spend needed to turn a subject into a finished course. A training provider can estimate it with one formula: finished hours, times development hours per finished hour, times a loaded hourly rate, plus add-ons for accessibility and review rework.

This walkthrough builds that calculator from sourced inputs and runs a worked example for a 90-minute interactive course. It does not cover marketing a course or what to charge a client, which our guide on how to price eLearning development handles.

Disclosure: SimpliAuthor is a SimpliTrain product, made by the same company that publishes this site. The calculator works with any authoring tool, and its numbers come from third-party sources, not from our product.

Key takeaways

  • The core formula is finished hours x development hours per finished hour x loaded hourly rate. The hours ratio is the biggest swing factor: it ran from 49 to 716 in the Chapman Alliance’s 2010 survey.
  • Published cost-per-hour ranges disagree because each multiplies a different ratio by a different rate and counts a different scope. Compare the ratio and the rate, not the headline.
  • In our worked example, a 90-minute Level 2 course lands between about $9,100 and $21,500 in internal labor at a $48 loaded rate. That is our own arithmetic, not a quote.
  • Treat every benchmark as a starting point, then replace it with your own logged hours after a few finished courses.

What counts as course development cost for a training provider?

Course development cost for a training provider is the internal labor, subject-matter expert (SME) time and authoring-tool spend required to produce one finished course. It excludes selling costs such as marketing, and it excludes the price you charge a client, which adds margin and risk on top of cost.

Three terms keep the math clean:

  • Finished hour: one hour of learner time in the completed course. A 90-minute course is 1.5 finished hours.
  • Development hours per finished hour: all team hours (analysis, storyboards, build, media, review, QA) divided by finished hours.
  • Loaded hourly rate: what an hour of a person’s time costs you, including benefits and not only wages.

How many hours does it take to develop one hour of eLearning?

The Chapman Alliance’s September 2010 survey found that one finished hour of eLearning took an average of 79 development hours at Level 1 (basic), 184 hours at Level 2 (interactive) and 490 hours at Level 3 (advanced). Instructor-led training averaged 43 hours. These are the most-cited ratios, and they are 16 years old.

The Chapman Alliance survey slides report 249 completed surveys from organizations, representing 3,947 learning development professionals. The last column is ours: Chapman’s average cost divided by its average hours.

Format Low (hours) Average (hours) High (hours) Average cost per finished hour (2010 dollars) Implied rate per hour
Instructor-led training 22 43 82 $5,934 $138
Level 1, basic eLearning 49 79 125 $10,054 $127
Level 2, interactive eLearning 127 184 267 $18,583 $101
Level 3, advanced eLearning 217 490 716 $50,371 $103

As summarized by Northpass on eLearning Industry, Level 1 is page-based content with test questions, Level 2 adds interactive exercises and richer audio and visual work, and Level 3 adds simulations, avatars or games.

The ratios also predate cloud authoring tools and AI. In her April 2025 update, Christy Tucker’s time estimates for eLearning development put an existing three-hour course conversion at 367 hours, about 122 per finished hour, below Chapman’s Level 2 average. She still adds a buffer for review.

Pro tip: Classify The Course Before You Estimate It. Count planned interactions per ten slides and note any simulation or branching. Tucker describes an interaction every two to three slides in her own work, which sits nearer Level 2 or 3. Use a level’s low end only when you own a proven template.

What hourly rate should you use in a course development cost calculation?

Use a loaded hourly rate: wages plus the employer cost of benefits, per hour worked. As of October 2026, the U.S. Bureau of Labor Statistics reports a $33.31 median hourly wage for training and development specialists and benefits at 30.0 percent of private-industry compensation, which gives roughly $48 an hour.

The arithmetic is $33.31 divided by 0.70, or $47.59, rounded to $48. The wage comes from the BLS Occupational Outlook Handbook (May 2025 data). The benefits share comes from the BLS Employer Costs for Employee Compensation release for June 2026, where private-industry employers paid $46.89 per hour worked in total, of which $14.07 was benefits.

Two caveats apply. Training and development specialists are a proxy for instructional designers, and the benefits share covers all private-industry workers. Replace both with your payroll figures or your freelancers’ quoted rates.

How do you calculate course development cost step by step?

To calculate course development cost, multiply finished hours by the development hours per finished hour for the course’s interactivity level, add percentage add-ons for accessibility and review rework, then multiply total hours by the loaded hourly rate. Record SME time and tool seats on separate lines.

Work through these steps in order:

  1. Convert length to finished hours. Divide the planned learner minutes by 60.
  2. Pick a ratio. Choose the low, average or high figure for the course’s level from the table above, then multiply by finished hours to get base hours.
  3. Add accessibility if the client needs it. The University of Southampton’s planning framework uses 35 percent more development time for WCAG 2.1 AA, drawn mainly from UK higher education and healthcare projects.
  4. Add a review buffer. Tucker’s 367-hour estimate becomes 440 hours with a 20 percent buffer.
  5. Multiply by the loaded rate. Then add separate lines for SME time, tool seats, translation and hosting.
  6. Divide by expected learners to get cost per learner.

As a formula:

Total hours = finished hours x hours per finished hour x (1 + accessibility %) x (1 + buffer %)
Labor cost = total hours x loaded hourly rate
Cost per learner = (labor cost + separate lines) / expected learners

Check whether your ratio already includes SME time. The Southampton Digital Learning post assumes SMEs take about 30 percent of project time on general content, without saying how that overlaps with Chapman’s ratios.

What does a course development cost calculation look like in practice?

A worked course development cost calculation for a 90-minute Level 2 course at a $48 loaded rate gives about $9,144 on the lean path, $15,898 on the typical path and $21,462 on the full path with accessibility. These are internal labor costs from our own arithmetic, not quotes or market prices.

Assume a provider turns a client’s classroom slides into one course, as in our guide to ILT to eLearning conversion. These scenarios and the 400-learner audience are our assumptions, not results from a real project.

Line Lean Typical Full
Ratio (hours per finished hour) 127 (Level 2 low) 184 (Level 2 average) 184 (Level 2 average)
Base hours (x 1.5 finished hours) 190.5 276.0 276.0
Accessibility add-on (35%) none none +96.6
Review buffer (20%) none +55.2 +74.5
Total hours 190.5 331.2 447.1
Labor cost at $48 per hour $9,144 $15,898 $21,462
Labor cost per finished hour $6,096 $10,598 $14,308
Labor cost per learner (400 learners) $22.86 $39.74 $53.65

The full path costs about 2.3 times the lean path, almost entirely from the ratio and add-ons chosen. SME time, tool seats and hosting are not in these totals.

Pro tip: Quote A Range, Then Narrow It. At scoping, show the lean-to-full range. Once the storyboard is signed off, the interaction count is known and you can pick one scenario. Ask clients to sign off the interaction list, not only the outline.

Why do published course development cost figures disagree?

Published course development cost figures disagree because each multiplies a different hours ratio by a different hourly rate and counts a different scope. The same Level 2 ratio of 184 hours costs $8,832 at $48 an hour and $23,000 at $125. Vendor price lists also add margin, project management and risk.

This matrix shows the effect. The $101 row reproduces Chapman’s 2010 average of $18,583 for Level 2.

Hourly rate Level 2 low (127 hours) Level 2 average (184 hours) Level 2 high (267 hours)
$48 (loaded in-house, BLS-based) $6,096 $8,832 $12,816
$75 $9,525 $13,800 $20,025
$101 (implied by Chapman) $12,827 $18,584 $26,967
$125 $15,875 $23,000 $33,375

In October 2026 we read the ten top-ranking pages for this query. Blue Carrot and eLearning Solutions Lab both state $5,000 to $50,000 per finished hour, Spark + Co states $10,000 to more than $250,000, and Raccoon Gang gives a 2026 average of $42,660 built from job-board rates. None shows the ratio and rate behind its range.

A workable rule: take ratios from Chapman or your own logs, take rates from your payroll, and treat vendor ranges as prices your clients may have seen, not as your cost. Turning cost into a quote is covered in pricing eLearning development for clients.

How do you replace benchmarks with your own course development cost data?

To replace benchmarks with your own course development cost data, log hours by task on every course, then divide total hours by finished hours for each interactivity level. Christy Tucker advises using published benchmarks as a starting point and tracking your own time, and the Southampton framework gives the same advice.

A simple log needs five columns:

  • Course and client code.
  • Finished minutes and interactivity level (1, 2 or 3).
  • Task: analysis, outline, storyboard, build, media, SME review, QA or rework.
  • Hours logged and who logged them.
  • A rework flag for hours caused by changes after sign-off.

After a few courses at one level, your average replaces Chapman’s. The rework-flagged share of hours sets your review buffer instead of a guess. A staged process keeps those hours visible, as in our course development process for small training teams.

Which costs sit outside the course development cost formula?

Four costs sit outside the labor formula: authoring-tool seats, translation, ongoing maintenance, and AI or media services. Track each on its own line so it does not hide inside the hours ratio. As of October 2026, we could not trace a verified industry benchmark for any of the four to primary data.

  • Authoring seats: priced per user per year. Our Articulate 360 pricing breakdown shows how to model seat cost for a training company.
  • Translation: price per language from vendor quotes, plus a re-check of the build.
  • Maintenance: Blue Carrot and eLearning Solutions Lab both say 15 to 25 percent of build cost per year, but neither shows data. Use it as a placeholder until your log says otherwise.
  • AI and media: usage-based when you bring your own AI key. Our post on AI course creation cost with your own API key covers controlling it.

What should you do next?

Run the course development cost formula on your next quote with all three scenarios, and start the hours log today. A range built from your own rate and a named benchmark is easier to defend with a client than one number from a vendor blog.

If much of your logged time goes into first drafts from documents and slides, test whether a tool changes your ratio. SimpliAuthor’s AI course authoring page says it builds lessons from uploaded documents and links, and claims “Author content up to 9× faster with integrated AI.” That is the vendor’s published claim, and we did not test it. Measure it in your own log first.

To see how SimpliTrain and SimpliAuthor, both from the company behind this site, fit a training provider’s workflow, you can request a SimpliTrain demo.

Frequently asked questions

How much does it cost to develop one hour of eLearning?

Average internal cost per finished hour was $10,054 at Level 1, $18,583 at Level 2 and $50,371 at Level 3 in the Chapman Alliance’s 2010 survey. At a $48 loaded rate, the Level 2 average of 184 hours costs $8,832 in labor.

How many hours does it take to develop one hour of eLearning?

The Chapman Alliance’s 2010 averages are 79 hours for basic, 184 for interactive and 490 for advanced eLearning. Christy Tucker’s 2025 estimate for converting an existing course came to about 122 hours per finished hour. Treat both as starting points.

What is a finished hour in eLearning?

A finished hour is one hour of learner time in the completed course. A course that takes learners 90 minutes is 1.5 finished hours. Development ratios divide all team hours by finished hours, so test learner timing with a pilot group before you fix the number.

Does AI reduce course development cost?

It may, but we found no independent benchmark. Two vendor guides claim 20 to 35 percent savings on parts of the budget, without published data. Christy Tucker cut her 2025 analysis, design, storyboard and graphics estimates, partly because of AI and experience. Measure the effect in your own log.

How much should I budget for course maintenance?

Blue Carrot and eLearning Solutions Lab state 15 to 25 percent of build cost per year, but neither shows its data. Use that as a placeholder, then replace it with logged update hours per course. Courses tied to changing rules or software usually need more.

What does eLearning development cost per minute?

Divide the per-hour figure by 60. At the Level 2 average of 184 hours and a $48 loaded rate, one finished minute takes about 3.1 development hours and about $147 in labor. Per-minute figures from other sources may include margin, so check what each one counts before comparing.

Want to learn more?

Reach out to us to learn more.

One Platform for
All Your Training Needs

Get a personalized demo.