SCORM 2004 sequencing is a set of rules in a course package’s manifest that tells the LMS which module a learner may open next and which navigation controls to show. In a multi-module aviation curriculum, it can enforce an order, such as systems modules first and the assessment last. It works only if the LMS honors it.
Most top results for this term are version comparisons or developer overviews. Few show a whole curriculum as a tree, and none pairs each rule with what breaks when an LMS ignores it. This guide does both and adds a test plan. It is for ground schools, maintenance and cabin crew trainers, and airline and airport training teams.
Disclosure: SimpliAuthor and SimpliTrain are made by the same company that publishes this site. We are a content authoring vendor, not an aviation authority. Nothing here is regulatory advice, and we did not test any LMS for this guide.
Key takeaways
- Sequencing lives in the manifest and governs movement between SCOs, not what happens inside one.
- By default only choice navigation is on, so a package with no rules lets learners open any module in any order.
- For every lock you write, decide what should happen if the LMS ignores it, then test that path.
- Sequencing rules never make a curriculum approved. Your authority approves the program.
What is SCORM 2004 sequencing and what does it control?
SCORM 2004 sequencing is the part of the standard that defines the order in which a learner can reach the activities in a course package. Manifest rules decide what opens next, what navigation shows and how results roll up. According to SCORM.com, sequencing “is what happens between SCOs and outside of SCOs.”
The SCORM.com sequencing overview says the rules come from IMS Simple Sequencing, adopted by SCORM rather than written for it. Sequencing “doesn’t affect how SCOs operate and navigate internally,” and using it is optional.
SCORM.com’s developer guide says sequencing does not apply to a course that is one big SCO, so split the curriculum into several SCOs first. For the version choice, see our SCORM 1.2 vs SCORM 2004 comparison.
How does an activity tree model a multi-module curriculum?
An activity tree models a curriculum as nested activities. The manifest’s organization is the whole tree, each activity with children is a cluster, and each launchable module is a leaf SCO. Rules attach to a cluster and govern its children.
This tree is our original illustration, not a real or approved syllabus.
Aircraft Systems Foundation (organization, flow on)
1. Orientation (SCO)
2. Systems cluster (choice on, flow off)
2.1 Electrical (SCO)
2.2 Hydraulics (SCO)
2.3 Fuel (SCO)
2.4 Air conditioning (SCO)
3. Scenarios cluster (flow on, choice off, forward only)
3.1 Hydraulic leak scenario (SCO)
3.2 Electrical fault scenario (SCO)
4. Final assessment cluster (two attempts, one of three forms)
4.1 Form A (SCO)
4.2 Form B (SCO)
4.3 Form C (SCO)
Three rules do the work. The Scenarios cluster is disabled until every Systems module is complete. The Final assessment is disabled until Orientation, Systems and Scenarios are complete. Course completion comes from the first three clusters, while the pass result comes only from the assessment.
How do choice, flow and forward-only change what learners can do?
Choice, flow and forward-only are control modes set on each cluster. Choice shows a table of contents so learners can pick any child. Flow adds previous and next buttons. Forward-only blocks backward movement. SCORM.com says only choice is enabled by default, so a package with no rules opens every module.
The SCORM.com definition model lists the defaults: choice true, flow false, forward-only false. Use choice alone for reference modules learners revisit. Use flow plus forward-only for a scenario chain where an early answer would give away a later one. Leave forward-only off wherever a learner may need to go back.
SCORM.com’s page on overriding the default sequencing rules names two common overrides. Set flow to true on all aggregations. Set “completion set by content” and “objective set by content” to true on every SCO. Without the second, the LMS “will automatically mark the content as completed and satisfied just because the learner launched it.”
How do prerequisites lock a module until another is finished?
A prerequisite in SCORM 2004 is a precondition rule on an activity. The rule reads an objective’s status and, when its condition is met, applies an action such as disabled. SCORM.com defines disabled as “Don’t let the activity be delivered. Prevent both flow and choice requests.”
The objective usually comes from an earlier module. That module writes its satisfied status to a global objective, and the locked activity reads it. In the definition model, reading satisfied status is on by default and writing is off, so turn writing on for the module that sets the flag.
Precondition rules also offer skip, hidden from choice and stop forward traversal. Mind one default. SCORM.com says global objectives can be read by any course in the LMS unless you set “objectives global to system” to false. Name every objective clearly, because SCORM.com notes they are often “overloaded and used as variables to control sequencing actions.”
How does rollup decide when a curriculum is complete?
Rollup is the process that turns the status of child activities into the status of their parent cluster. A SCO reports its own data at run time, and a cluster gets its data from its children. SCORM.com warns that once you write a satisfaction rule, every case it does not cover results in unknown satisfaction.
Completion and satisfaction are separate in SCORM 2004, so a learner can finish a module and still fail it. Rollup lets you choose which activities count toward each.
The SCORM.com Golf sequencing examples include a “post test rollup” pattern that suits aviation. Course completion and score depend only on the post test, and all other activities are excluded from rollup. Our tree uses a close variant: modules set completion, and the assessment sets the pass result.
Which SCORM 2004 sequencing pattern fits which curriculum need?
Six patterns cover most multi-module curricula. Each pairs a manifest feature with an aviation use and with what the learner sees if the LMS ignores the rule. The last column is our analysis of the specification’s behavior, not a test result from any LMS.
| Pattern | Manifest feature | Aviation use (illustration) | If the LMS ignores it |
|---|---|---|---|
| Free order | Choice on (default) | System overviews | Nothing changes. |
| Fixed order | Flow on, choice off | Orientation, then lessons | Learners may jump around. Fails open. |
| No going back | Forward-only | Scenario chain | Earlier scenarios reopen. Fails open. |
| Prerequisite lock | Precondition rule, disabled, global objective | Assessment locked until modules are done | Every module opens. Fails open. A half-working objective map can lock learners out. Fails closed. |
| Exam decides the result | Rollup rules, objective exclusions | Modules set completion, assessment sets pass | Status may never complete. Can fail closed. |
| Attempt limit, random form | Limit conditions, selection controls | Two attempts on one of three forms | Unlimited attempts, fixed form. Fails open. |
Failing closed matters more than failing open. A lock that never opens strands a real learner.
Pro tip: Write a Rule Sheet First. Before you edit the manifest, list each lock in one plain sentence, with its fails-open or fails-closed note. The sheet becomes your test script and tells the client’s LMS admin what the platform must do.
Does every LMS support SCORM 2004 sequencing?
No. LMS support for SCORM 2004 sequencing is uneven. iSpring’s guide, updated September 2026, says many LMSs can launch SCORM 2004 courses but may not support every feature, especially sequencing. Paradiso’s guide, updated September 2026, says an LMS can record completion while ignoring sequencing.
ADL’s SCORM 2004 4th Edition Testing Requirements, version 1.1, list sequencing and navigation as one of three LMS compliance categories. An LMS in it must implement “All of the sequencing behaviors defined by the pseudo-code.” A general support claim does not say which categories a vendor passed, so ask.
Editions add a second layer. SCORM.com says the 1st Edition “isn’t deployed or usable,” the 3rd is the most widely used, and the 4th adds jump navigation, shared data and weighted completion rollup. ELB Learning’s knowledge base says some LMSs support only the 4th Edition.
Our guide to SCORM compatibility across LMS platforms lists named platforms and where sources disagree. We did not research vendors again here.
When should you use SCORM 2004 sequencing instead of LMS prerequisites?
Use SCORM 2004 sequencing when you can test the client’s LMS and need the order to travel with the package. Let the LMS enforce order, through prerequisites or learning paths, when the platform is unknown or untested. Pick the one you can verify before delivery.
Choose manifest sequencing when:
- You deliver to one known LMS and have run the package there.
- You sell to several clients, and each LMS passes your test script.
Choose LMS prerequisites when:
- The client’s LMS is unknown, untested or limited to SCORM 1.2.
- Your authoring tool cannot write sequencing rules.
Check that last point first. One reply in the Articulate Community says Storyline has no sequencing feature, and we did not verify it. Ask your tool’s vendor which rules it can write.
Do sequencing rules make an aviation curriculum approved?
No. SCORM 2004 sequencing rules control the order in which an LMS delivers modules. They do not make a curriculum approved, accepted or compliant with any regulator. Your approving authority decides what your program may include and how it must run. Check with that authority first.
Sequencing can deliver an order your approved syllabus already sets. It cannot create that approval. Our guide to what regulators accept for aviation eLearning explains how approval works. For module structure in a long course, see type rating ground school as eLearning.
How do you test SCORM 2004 sequencing before a client sees it?
Test sequencing by running the package in a neutral player first, then in the client’s LMS, and walking every locked path on purpose, with an expected result written down for each rule. Our SCORM package QA checklist covers general testing. These steps add the sequencing paths.
- Try to open each locked module from the table of contents before its prerequisites are done. It should be disabled or hidden.
- Finish the prerequisites, exit and relaunch. The locked module should now open.
- Fail the assessment until the attempt limit. Check the form drawn and the limit.
- Quit mid-module and relaunch. Resume and locks should both hold.
- Read the LMS report. Completion and success should show as separate results.
Mark each rule as passed, failed open or failed closed. Also agree with the client how support can mark a learner complete if a rule locks them out, because fail-closed bugs show up on deadline day. Send the record with the package.
What should you do next?
Pick one curriculum and draw its tree on one page. Mark which modules need an order. Write the Rule Sheet, then run the package in a neutral player before any client LMS. If a lock fails only in the client’s LMS, fall back to LMS prerequisites.
If you publish through SimpliTrain, the vendor’s deliver with the SimpliTrain LMS page says courses publish as SCORM packages in two versions, SCORM 1.2 and SCORM 2004. That is based on the vendor’s published documentation. The page makes no sequencing claims, and we did not test whether authored rules run there, so ask in a SimpliTrain demo.
Frequently asked questions
What is SCORM 2004 sequencing?
SCORM 2004 sequencing is a set of manifest rules that controls the order in which a learner can reach the SCOs in a course package. It also sets which navigation controls the LMS shows and how child results roll up to a parent. It applies between SCOs, not inside them.
Does SCORM 1.2 support sequencing?
No. SCORM.com says SCORM 1.2 lacked a sequencing and navigation specification, and most SCORM 1.2 content was a single monolithic SCO. To control module order in SCORM 1.2, set prerequisites or learning paths in the LMS. See our SCORM 1.2 vs 2004 guide for the rest.
Which SCORM 2004 edition should I use for sequencing?
Use the 4th Edition only if the client’s LMS supports it. SCORM.com says the 3rd Edition is the most widely used, and the 4th adds jump navigation, shared data and weighted completion rollup. ELB Learning says some LMSs support only the 4th. Ask the client which edition the LMS accepts, then test.
Why does my LMS ignore SCORM 2004 sequencing rules?
The LMS may not implement sequencing. Paradiso’s guide says an LMS can launch a SCORM 2004 course and record completion while ignoring sequencing. Check the vendor’s documentation for supported editions and features, run the package in a neutral player, and fall back to LMS prerequisites if needed.
What is the difference between choice and flow in SCORM 2004?
Choice gives the learner a table of contents to pick any child activity. Flow adds previous and next buttons. SCORM.com lists choice as on and flow as off by default, so a package with no rules shows only a table of contents.



