Illustrated cover reading "Software Simulation Training for EFB and MRO" on a lavender background with a grid pattern

Software Simulation Training for EFB and MRO Systems: A Build Guide

Table of Contents

Share:
Easily share intel
Summarise this page with your favorite AI assistant

Software simulation training lets a learner practice a task in a safe copy of an application, such as finding a chart in an electronic flight bag (EFB) app or closing a defect in a maintenance, repair and overhaul (MRO) system, before touching the live system. This guide shows training providers which tasks to simulate, which mode to use and how to keep the result current.

We are a content authoring vendor, not an aviation authority. SimpliAuthor is a SimpliTrain product, made by the same company that publishes this site, and we did not test any authoring tool named here. Nothing here says a course or tool is approved by a regulator. Your approved program and your authority decide that. The regulatory sentences are orientation, not advice: have a qualified person check them against the current text.

Key takeaways

  • The FAA’s AC 120-76E says EFB practice can use “the actual or simulated EFB equipment and displays.” EASA also expects EFB training.
  • Match the mode to the risk: View for quick lookups, Try for data entry, Test for a few critical steps, branching for failures and decisions.
  • Train in a copy of the system with dummy data. Never record or practice on live records.
  • Tie every simulation step to a software release, so an update tells you what to re-record.

What is software simulation training, and why do EFB and MRO systems need it?

Software simulation training is practice on a recorded or replicated copy of an application, where learners click and type through a task and get feedback without changing real data. EFB and MRO systems suit it because their tasks have many steps, errors are costly and screens change with each release.

According to ELM Learning’s FAQ, simple, intuitive tasks may need only a demonstration, while multi-step tasks benefit from simulation.

What do regulators say about training on EFB and maintenance systems?

FAA and EASA texts both expect operators to train people on EFBs, but neither requires a simulation. The FAA’s AC 120-76E, dated June 12, 2024, says an EFB program should include a means to train crewmembers when EFBs are introduced and when hardware or applications change.

Four points matter for a simulation project:

  • FAA, practice: section 12.6.3 says “Training should provide an opportunity for instruction, demonstration, and practice using the actual or simulated EFB equipment and displays.” The FAA evaluates the operator’s program under OpSpec, MSpec or LOA A061.
  • FAA, other staff: section 12.6.1 says EFB training may be required for non-flightcrew members who use similar devices, and lists “maintenance personnel, loading personnel, and dispatchers.”
  • EASA: in its Easy Access Rules for Air Operations, SPA.EFB.100(b)(3) refers to “procedures and training requirements for the administration and use of the EFB device.” The related guidance says “Flight crew members should be given specific training on the use of the EFB system before it is operationally used.” Check the current edition.
  • MRO, US repair stations: 14 CFR 145.163 requires an employee training program “approved by the FAA” that consists of initial and recurrent training and ensures each employee “is capable of performing the assigned task.” Other authorities have their own rules.

A simulation can supply the practice step. Whether it counts inside an operator’s or repair station’s program is decided within that program, by the authority that approves it.

Which EFB and MRO tasks should you simulate, and in which mode?

Simulate the EFB and MRO tasks where a wrong click has a cost, and choose the mode by risk: View for quick lookups, Try for data entry, Test for a few critical steps and branching for failures and decisions. The table is our design judgment, not regulator guidance.

System Task Mode Why
EFB Find a chart or document View, then Try Low risk. Learners need to know where things live.
EFB Enter data and check a computed result Try, then Test AC 120-76E section 12.6 lists “procedures for cross-checking data entry and computed information.”
EFB Handle an EFB failure and obtain a backup Branching The same section lists EFB failures, “to include procedures for obtaining a backup.”
EFB Administer the device: apply or verify an update View, then Try EASA guidance says each person in EFB administration should receive training for their role.
MRO Open a task card and sign off a step Try, then Test Highest-stakes click. Practice only in a training copy.
MRO Raise a defect and choose the next action Branching Choices have consequences. The right branch comes from your approved procedure.
MRO Requisition a part Try A published rollout simulated it (see below).
MRO Search a component or aircraft record View Low risk, short and reusable as a refresher.

Our guide to scenario-based learning covers branch structure and feedback.

How do View, Try and Test modes differ?

View, Try and Test are three modes of one simulation. According to Articulate Support’s Storyline 360 guidance, updated January 2026, View demonstrates a process with mouse movements and captions, Try lets learners practice and works as an ungraded assessment, and Test works as a graded exam.

One default deserves a decision. The Articulate article says that in Test Mode, learners can by default retry each step an unlimited number of times. For a graded step, set the attempt limit yourself.

Pro tip: Score The Critical Steps Only. Iconlogic’s July 2026 advice is that assessment mode should drop hints, limit attempts and score only the steps that matter. For a task card, score the sign-off decision, not whether the learner found the menu. Your approved program decides whether the result counts as competence.

How do you build software simulation training for an EFB or MRO system?

Build software simulation training in six steps: choose one short task, get a training copy with dummy data, write a step table, record, edit captions and hotspots, then test in your LMS. The steps follow Articulate and Iconlogic guidance. The aviation notes are ours.

  1. Choose one task. Iconlogic advises one short, measurable task, not a whole application. Run a task analysis with an SME, as Articulate suggests, and take the steps from the approved procedure. Our SOP to training guide shows how.
  2. Get a training copy. Articulate recommends a sandbox, a learner-like account and dummy data. Use fictitious aircraft, crew and technician records, and hide credentials and any customer or security-sensitive detail. If the vendor offers no training instance, build from sanitized screens and label the course as a simulation.
  3. Write the step table. Use the template below before recording.
  4. Record. Clear the desktop, turn off notifications and make a test recording first, as Articulate advises.
  5. Edit. Replace captions like “Click here” with action-based text, check auto-generated hotspots and add alternate correct answers for typed entries (Iconlogic).
  6. Test as a learner in your LMS. Iconlogic notes that behavior can change after upload.

The two example rows below are fictitious. The last column is what keeps the simulation current.

Step Screen and data Learner action Feedback if wrong Mode and scoring Release trigger
3 Task card list, fictitious aircraft Open the assigned card “That card belongs to another work order. Check the number.” Try, hint shown, not scored Task list layout change
7 Sign-off dialog, training account Sign off the step “Enter the measured value before signing.” Test, scored, two attempts Sign-off workflow change

Which authoring tools build software simulations?

Three authoring tools document multi-mode software simulations: Articulate Storyline 360, Adobe Captivate and ActivePresenter. SimpliAuthor’s published product page, as of October 2026, does not describe software simulation or screen recording. We report vendor documentation with its date and did not test any tool.

Tool What the documentation says Source date
Storyline 360 Step-by-step slides in View, Try and Test modes. Audio is not included in step-by-step slides. Articulate Support, January 2026
Captivate One recording session produces demo, training and assessment projects. Described as responsive. Adobe blog, February 2024
ActivePresenter Four modes: Demonstration, Tutorial, Practice and Test. Windows and macOS. HTML5 export lets you choose the modes. Atomi documentation, August 2023
SimpliAuthor No simulation or screen recording described. Canvas blocks include interactive media and assessments. The free SCORM Converter accepts MP4 files up to 95 MB and generates SCORM 1.2 or 2004. simpliauthor.com pages, October 2026

A practical split: build the click-through in a simulation tool and export it as SCORM. Use SimpliAuthor for the course around it, such as concepts, procedures and checks, or, based on its published pages, to wrap a recorded View-mode demo as SCORM. Our MP4 to SCORM guide explains what a video package does and does not track.

What does an MRO software training rollout look like in practice?

WestJet’s rollout of Trax eMRO software is a published example of MRO software training. According to Adobe’s customer story dated October 15, 2025, more than 1,100 employees needed training, and the program included more than 600 modules with simulations of tasks such as defect management and part requisition.

Adobe reports that 96% of 850 production aircraft maintenance engineers were trained in six weeks across 12 cities, and that about 50% of trainees returned to the simulations after their required training. The story is vendor-published and the figures are self-reported, so we did not verify them. Our reading: build short, task-sized simulations, because people return to them.

How do you track results and keep click-through simulations accessible?

Track software simulation results by publishing to your LMS, reporting a few critical-step results and checking the report as a learner. Keep the simulation accessible by giving every click a keyboard path, because WCAG 2.2 Success Criterion 2.1.1 (Level A) requires that “All functionality of the content is operable through a keyboard interface.”

Hotspot simulations are built around mouse clicks, so test tab order and keyboard operation in the published output. Our WCAG 2.2 AA guide for training providers covers the wider checklist.

How do you keep software simulation training current after an update?

Keep software simulation training current with a release-to-simulation map: list the system version each step shows, and flag the steps whenever a release changes that screen. AC 120-76E says EFB training should be incorporated “when any changes to EFB hardware or EFB applications are made,” so an update is a training event.

ELM Learning’s FAQ says training frequency should match the software’s update or release cycle. In the step table, the last column does the work: when a release note touches a screen, filter on that trigger and re-record only those steps. For the wider course, see our guide to course version control when regulations change.

Pro tip: Capture A Version Screen. Record the app’s About or version screen as the first frame of every simulation project file, and keep it out of the learner view. Anyone opening the file later can see which release the screens came from.

What should you do next?

Start with one task: the EFB or MRO task that causes the most errors or support requests. Write its step table and build View and Try modes first. Add Test mode only for the steps your approved program needs scored.

If you build courses for clients, SimpliAuthor, a SimpliTrain product, can build the course around your simulation and package it as SCORM. You can also request a SimpliTrain demo to discuss delivery and records. We have not tested software-simulation workflows in SimpliAuthor, so ask about your exact need.

Frequently asked questions

What is the difference between a screencast and a software simulation?

A screencast is a recorded video of a screen, while a software simulation is interactive. Articulate describes a video screencast as a single file that is not very interactive, and a simulation as a series of screens where learners click and type as in the real software. Use a screencast to demonstrate and a simulation when learners must practice.

Can EFB training use a simulated EFB instead of the real device?

The FAA’s AC 120-76E, section 12.6.3, says training should offer practice using “the actual or simulated EFB equipment and displays.” It also says flight simulation training devices and other approved training devices may be used. Whether your simulation fits an operator’s EFB program is decided with the authority that authorizes it, so check with yours.

Should a Test mode score count as a competence record?

Check your approved program first. A Test mode score shows that a learner completed steps in a copy of the software. For US repair stations, 14 CFR 145.163 requires a training program approved by the FAA that ensures employees can perform their assigned tasks, so the program, not the tool, defines what counts.

How often should a software simulation be updated?

Update it whenever the software changes a screen the simulation shows. ELM Learning’s FAQ says training frequency should match the software’s release cycle, and AC 120-76E says EFB training should be incorporated when changes to EFB hardware or applications are made.

Are click-through software simulations accessible?

Only if you build and test them that way. WCAG 2.2 Success Criterion 2.1.1 requires that all functionality be operable through a keyboard interface, and hotspot simulations are built around mouse clicks. Check tab order, captions and feedback in your tool’s published output, and test with a keyboard before delivery.

Want to learn more?

Reach out to us to learn more.

One Platform for
All Your Training Needs

Get a personalized demo.